afalg with OpenSSL 1.1.0f 25 May 2017

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

afalg with OpenSSL 1.1.0f 25 May 2017

OpenSSL - Dev mailing list
Hi,

I am trying to use afalg on Linux 4.9.37 with OpenSSL 1.1.0f.

I am facing 2 issues:

ONE: when I issue the speed command, I see the following:

[root@localhost apps]# ./openssl speed -evp aes-128-cbc -engine afalg
invalid engine "afalg"
139853452924736:error:2506406A:DSO support routines:dlfcn_bind_func:could not bind to the requested symbol name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine): /usr/local/lib64/engines-1.1/afalg.so: undefined symbol: bind_engine
139853452924736:error:2506C06A:DSO support routines:DSO_bind_func:could not bind to the requested symbol name:crypto/dso/dso_lib.c:185:
139853452924736:error:260B6068:engine routines:dynamic_load:DSO failure:crypto/engine/eng_dyn.c:427:
139853452924736:error:2606A074:engine routines:ENGINE_by_id:no such engine:crypto/engine/eng_list.c:339:id=afalg
139853452924736:error:25066067:DS


nm afalg.so doesn't show bind_engine


When I modify the openssl.cnf file with the engine name and the CIPHERS, still I dont get it working. The command output and the change in the openssl.cnf pasted at the end of the mail.


TWO: I had to create a softlink to libcrypto.so.1.1 and libssl.so.1.1 like the following to make openssl command work:
ln -s /usr/local/lib64/libssl.so.1.1 /lib64/libssl.so.1.1
ln -s /usr/local/lib64/libcrypto.so.1.1 /lib64/libcrypto.so.1.1

Is creating the softlinks a known issue and will be fixed?

I have pasted the complete information about the OS/distro environment and installation commands I ran at the bottom.
Could you please suggest what wrong I am doing to make afalg work.

Thanks
Jitendra Lulla

========


BEFORE INSTALLATION:

[root@localhost jlulla]# rpm -qa  |grep openssl
openssl-1.0.1e-60.el7.x86_64
openssl-devel-1.0.1e-60.el7.x86_64
openssl-libs-1.0.1e-60.el7.x86_64

[root@localhost jlulla]# openssl version
OpenSSL 1.0.1e-fips 11 Feb 2013



PLEASE SEE FROM HERE PLEASE SEE FROM HERE PLEASE SEE FROM HERE----------------------------

STEP 1 : SOURCE TAKEN FROM https://www.openssl.org/source/openssl-1.1.0f.tar.gz 2017-May-25 13:09:51

[root@localhost jlulla]# uname -a
Linux localhost.localdomain 4.9.37 #1 SMP Fri Jul 21 04:52:46 PDT 2017 x86_64 x86_64 x86_64 GNU/Linux

[root@localhost jlulla]# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 7.3 (Maipo)



[root@localhost openssl-1.1.0f]# pwd
/home/jlulla/openssl-1.1.0f

STEP 2: [root@localhost openssl-1.1.0f]# ./config shared enable-engine enable-dso enable-afalgeng
Operating system: x86_64-whatever-linux2
Configuring for linux-x86_64
Configuring OpenSSL version 1.1.0f (0x1010006fL)
    no-asan        [default]  OPENSSL_NO_ASAN
    no-crypto-mdebug [default]  OPENSSL_NO_CRYPTO_MDEBUG
    no-crypto-mdebug-backtrace [default]  OPENSSL_NO_CRYPTO_MDEBUG_BACKTRACE
    no-ec_nistp_64_gcc_128 [default]  OPENSSL_NO_EC_NISTP_64_GCC_128
    no-egd          [default]  OPENSSL_NO_EGD
    no-fuzz-afl    [default]  OPENSSL_NO_FUZZ_AFL
    no-fuzz-libfuzzer [default]  OPENSSL_NO_FUZZ_LIBFUZZER
    no-heartbeats  [default]  OPENSSL_NO_HEARTBEATS
    no-md2          [default]  OPENSSL_NO_MD2 (skip dir)
    no-msan        [default]  OPENSSL_NO_MSAN
    no-rc5          [default]  OPENSSL_NO_RC5 (skip dir)
    no-sctp        [default]  OPENSSL_NO_SCTP
    no-ssl-trace    [default]  OPENSSL_NO_SSL_TRACE
    no-ssl3        [default]  OPENSSL_NO_SSL3
    no-ssl3-method  [default]  OPENSSL_NO_SSL3_METHOD
    no-ubsan        [default]  OPENSSL_NO_UBSAN
    no-unit-test    [default]  OPENSSL_NO_UNIT_TEST
    no-weak-ssl-ciphers [default]  OPENSSL_NO_WEAK_SSL_CIPHERS
    no-zlib        [default]
    no-zlib-dynamic [default]
Configuring for linux-x86_64
CC            =gcc
CFLAG        =-Wall -O3 -pthread -m64 -DL_ENDIAN  -Wa,--noexecstack
SHARED_CFLAG  =-fPIC -DOPENSSL_USE_NODELETE
DEFINES      =DSO_DLFCN HAVE_DLFCN_H NDEBUG OPENSSL_THREADS OPENSSL_NO_STATIC_ENGINE OPENSSL_PIC OPENSSL_IA32_SSE2 OPENSSL_BN_ASM_MONT OPENSSL_BN_ASM_MONT5 OPENSSL_BN_ASM_GF2m SHA1_ASM SHA256_ASM SHA512_ASM RC4_ASM MD5_ASM AES_ASM VPAES_ASM BSAES_ASM GHASH_ASM ECP_NISTZ256_ASM PADLOCK_ASM POLY1305_ASM
LFLAG        =
PLIB_LFLAG    =
EX_LIBS      =-ldl
APPS_OBJ      =
CPUID_OBJ    =x86_64cpuid.o
UPLINK_OBJ    =
BN_ASM        =asm/x86_64-gcc.o x86_64-mont.o x86_64-mont5.o x86_64-gf2m.o rsaz_exp.o rsaz-x86_64.o rsaz-avx2.o
EC_ASM        =ecp_nistz256.o ecp_nistz256-x86_64.o
DES_ENC      =des_enc.o fcrypt_b.o
AES_ENC      =aes-x86_64.o vpaes-x86_64.o bsaes-x86_64.o aesni-x86_64.o aesni-sha1-x86_64.o aesni-sha256-x86_64.o aesni-mb-x86_64.o
BF_ENC        =bf_enc.o
CAST_ENC      =c_enc.o
RC4_ENC      =rc4-x86_64.o rc4-md5-x86_64.o
RC5_ENC      =rc5_enc.o
MD5_OBJ_ASM  =md5-x86_64.o
SHA1_OBJ_ASM  =sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o sha1-mb-x86_64.o sha256-mb-x86_64.o
RMD160_OBJ_ASM=
CMLL_ENC      =cmll-x86_64.o cmll_misc.o
MODES_OBJ    =ghash-x86_64.o aesni-gcm-x86_64.o
PADLOCK_OBJ  =e_padlock-x86_64.o
CHACHA_ENC    =chacha-x86_64.o
POLY1305_OBJ  =poly1305-x86_64.o
BLAKE2_OBJ    =
PROCESSOR    =
RANLIB        =ranlib
ARFLAGS      =
PERL          =/usr/bin/perl

SIXTY_FOUR_BIT_LONG mode

Configured for linux-x86_64.
[root@localhost openssl-1.1.0f]#

make didnt give any error.

make install didnt give any error

updatedb

STEP 2:
[root@localhost openssl-1.1.0f]# md5sum /home/jlulla/openssl-1.1.0f/libssl.so.1.1 /usr/local/lib64/libssl.so.1.1
5a7264a3ebda22989c831794d30677c5  /home/jlulla/openssl-1.1.0f/libssl.so.1.1
5a7264a3ebda22989c831794d30677c5  /usr/local/lib64/libssl.so.1.1

[root@localhost openssl-1.1.0f]# ls -l /home/jlulla/openssl-1.1.0f/libssl.so
lrwxrwxrwx. 1 root root 13 Aug 10 23:45 /home/jlulla/openssl-1.1.0f/libssl.so -> libssl.so.1.1


[root@localhost apps]# pwd
/home/jlulla/openssl-1.1.0f/apps
[root@localhost apps]# ./openssl
./openssl: error while loading shared libraries: libssl.so.1.1: cannot open shared object file: No such file or directory

[root@localhost apps]# ldd ./openssl
        linux-vdso.so.1 =>  (0x00007ffd02f3c000)
        libssl.so.1.1 => not found
        libcrypto.so.1.1 => not found
        libdl.so.2 => /lib64/libdl.so.2 (0x00007f0439fda000)
        libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f0439dbe000)
        libc.so.6 => /lib64/libc.so.6 (0x00007f04399fc000)
        /lib64/ld-linux-x86-64.so.2 (0x000055d618530000)


[root@localhost apps]# ls -l /lib64/libssl.so.1.1
ls: cannot access /lib64/libssl.so.1.1: No such file or directory

ln -s /usr/local/lib64/libssl.so.1.1 /lib64/libssl.so.1.1

STEP 3:
[root@localhost apps]# ln -s /usr/local/lib64/libssl.so.1.1 /lib64/libssl.so.1.1
[root@localhost apps]# ls -l /lib64/libssl.so.1.1
lrwxrwxrwx. 1 root root 30 Aug 10 23:57 /lib64/libssl.so.1.1 -> /usr/local/lib64/libssl.so.1.1


[root@localhost apps]# ln -s /usr/local/lib64/libcrypto.so.1.1 /lib64/libcrypto.so.1.1
[root@localhost apps]# ls -l /lib64/libcrypto.so.1.1
lrwxrwxrwx. 1 root root 33 Aug 10 23:58 /lib64/libcrypto.so.1.1 -> /usr/local/lib64/libcrypto.so.1.1

[root@localhost apps]# ldd ./openssl
        linux-vdso.so.1 =>  (0x00007ffd37b5e000)
        libssl.so.1.1 => /lib64/libssl.so.1.1 (0x00007f82881f8000)
        libcrypto.so.1.1 => /lib64/libcrypto.so.1.1 (0x00007f8287d73000)
        libdl.so.2 => /lib64/libdl.so.2 (0x00007f8287b6e000)
        libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f8287952000)
        libc.so.6 => /lib64/libc.so.6 (0x00007f8287591000)
        /lib64/ld-linux-x86-64.so.2 (0x000055f06bc67000)


[root@localhost apps]# ./openssl version
OpenSSL 1.1.0f  25 May 2017


STEP 4:
[root@localhost afalg]# pwd
/home/jlulla/openssl-1.1.0f/engines/afalg

[root@localhost afalg]# ls
afalg.so  build.info  e_afalg.c  e_afalg.d  e_afalg.ec  e_afalg_err.c  e_afalg_err.d  e_afalg_err.h  e_afalg_err.o  e_afalg.h  e_afalg.o

[root@localhost afalg]# ldd afalg.so
        linux-vdso.so.1 =>  (0x00007fff1d7ef000)
        libcrypto.so.1.1 => /lib64/libcrypto.so.1.1 (0x00007f3a80166000)
        libdl.so.2 => /lib64/libdl.so.2 (0x00007f3a7ff62000)
        libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f3a7fd45000)
        libc.so.6 => /lib64/libc.so.6 (0x00007f3a7f984000)
        /lib64/ld-linux-x86-64.so.2 (0x0000560991976000)


[root@localhost afalg]# nm afalg.so
0000000000202060 d AFALG_error_init
0000000000202220 b AFALG_lib_error_code
0000000000202160 d AFALG_str_functs
0000000000202080 d AFALG_str_reasons
0000000000202210 B __bss_start
0000000000202210 b completed.6344
                w __cxa_finalize@@GLIBC_2.2.5
0000000000000a00 t deregister_tm_clones
0000000000000a70 t __do_global_dtors_aux
0000000000201da0 t __do_global_dtors_aux_fini_array_entry
0000000000201db0 d __dso_handle
0000000000201db8 d _DYNAMIC
0000000000202210 D _edata
0000000000202228 B _end
0000000000000af0 T engine_load_afalg_int
0000000000000bb0 T ERR_AFALG_error
                U ERR_get_next_error_library@@OPENSSL_1_1_0
0000000000000b00 T ERR_load_AFALG_strings
                U ERR_load_strings@@OPENSSL_1_1_0
                U ERR_put_error@@OPENSSL_1_1_0
0000000000000b60 T ERR_unload_AFALG_strings
                U ERR_unload_strings@@OPENSSL_1_1_0
0000000000000bf8 T _fini
0000000000000ab0 t frame_dummy
0000000000201d98 t __frame_dummy_init_array_entry
0000000000000eb8 r __FRAME_END__
0000000000202000 d _GLOBAL_OFFSET_TABLE_
                w __gmon_start__
0000000000000970 T _init
                w _ITM_deregisterTMCloneTable
                w _ITM_registerTMCloneTable
0000000000201da8 d __JCR_END__
0000000000201da8 d __JCR_LIST__
                w _Jv_RegisterClasses
0000000000000a30 t register_tm_clones
0000000000202210 d __TMC_END__


[root@localhost openssl-1.1.0f]# locate afalg.so
/home/jlulla/openssl-1.1.0f/engines/afalg/afalg.so
/usr/local/lib64/engines-1.1/afalg.so


[root@localhost openssl-1.1.0f]# md5sum /home/jlulla/openssl-1.1.0f/engines/afalg/afalg.so /usr/local/lib64/engines-1.1/afalg.so
ec273faa6eb6e25f55e44a7d37adf195  /home/jlulla/openssl-1.1.0f/engines/afalg/afalg.so
ec273faa6eb6e25f55e44a7d37adf195  /usr/local/lib64/engines-1.1/afalg.so


[root@localhost apps]# date
Fri Aug 11 00:01:10 PDT 2017


[root@localhost apps]# ls -l /usr/local/ssl/openssl.cnf
-rw-r--r--. 1 root root 10771 Aug 10 23:47 /usr/local/ssl/openssl.cnf

[root@localhost apps]# md5sum /usr/local/ssl/openssl.cnf /home/jlulla/openssl-1.1.0f/apps/openssl.cnf
f697ef5df0d006882e6326606e8dbf4a  /usr/local/ssl/openssl.cnf
f697ef5df0d006882e6326606e8dbf4a  /home/jlulla/openssl-1.1.0f/apps/openssl.cnf


openssl.cnf has the following:
..
..
# Extra OBJECT IDENTIFIER info:
#oid_file              = $ENV::HOME/.oid
oid_section            = new_oids

# To use this configuration file with the "-extfile" option of the
# "openssl x509" utility, name here the section containing the
# X.509v3 extensions to use:
# extensions            =
# (Alternatively, use a configuration file that has only
# X.509v3 extensions in its main [= default] section.)

..
..

[root@localhost apps]# ./openssl speed -evp aes-128-cbc -engine afalg
invalid engine "afalg"
139853452924736:error:2506406A:DSO support routines:dlfcn_bind_func:could not bind to the requested symbol name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine): /usr/local/lib64/engines-1.1/afalg.so: undefined symbol: bind_engine
139853452924736:error:2506C06A:DSO support routines:DSO_bind_func:could not bind to the requested symbol name:crypto/dso/dso_lib.c:185:
139853452924736:error:260B6068:engine routines:dynamic_load:DSO failure:crypto/engine/eng_dyn.c:427:
139853452924736:error:2606A074:engine routines:ENGINE_by_id:no such engine:crypto/engine/eng_list.c:339:id=afalg
139853452924736:error:25066067:DSO support routines:dlfcn_load:could not load the shared library:crypto/dso/dso_dlfcn.c:113:filename(libafalg.so): libafalg.so: cannot open shared object file: No such file or directory
139853452924736:error:25070067:DSO support routines:DSO_load:could not load the shared library:crypto/dso/dso_lib.c:161:
139853452924736:error:260B6084:engine routines:dynamic_load:dso not found:crypto/engine/eng_dyn.c:414:
^C


Modified both the files as the follwing:
/usr/local/ssl/openssl.cnf
/home/jlulla/openssl-1.1.0f/apps/openssl.cnf

# Extra OBJECT IDENTIFIER info:
#oid_file              = $ENV::HOME/.oid
oid_section            = new_oids

openssl_conf = openssl_def

[openssl_def]
engines = openssl_engines

[openssl_engines]
afalg = afalg_engine

[afalg_engine]
CIPHERS=aes-128-cbc

With the above, the errors are more:
[root@localhost apps]# ./openssl speed -evp aes-128-cbc -engine afalg
invalid engine "afalg"
140473780422464:error:2506406A:DSO support routines:dlfcn_bind_func:could not bind to the requested symbol name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine): /usr/local/lib64/engines-1.1/afalg.so: undefined symbol: bind_engine
140473780422464:error:2506C06A:DSO support routines:DSO_bind_func:could not bind to the requested symbol name:crypto/dso/dso_lib.c:185:
140473780422464:error:260B6068:engine routines:dynamic_load:DSO failure:crypto/engine/eng_dyn.c:427:
140473780422464:error:2606A074:engine routines:ENGINE_by_id:no such engine:crypto/engine/eng_list.c:339:id=afalg
140473780422464:error:260BC066:engine routines:int_engine_configure:engine configuration error:crypto/engine/eng_cnf.c:141:section=afalg_engine, name=CIPHERS, value=aes-128-cbc
140473780422464:error:0E07606D:configuration file routines:module_run:module initialization error:crypto/conf/conf_mod.c:173:module=engines, value=openssl_engines, retcode=-1
140473780422464:error:2506406A:DSO support routines:dlfcn_bind_func:could not bind to the requested symbol name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine): /usr/local/lib64/engines-1.1/afalg.so: undefined symbol: bind_engine
140473780422464:error:2506C06A:DSO support routines:DSO_bind_func:could not bind to the requested symbol name:crypto/dso/dso_lib.c:185:
140473780422464:error:260B6068:engine routines:dynamic_load:DSO failure:crypto/engine/eng_dyn.c:427:
140473780422464:error:2606A074:engine routines:ENGINE_by_id:no such engine:crypto/engine/eng_list.c:339:id=afalg
140473780422464:error:25066067:DSO support routines:dlfcn_load:could not load the shared library:crypto/dso/dso_dlfcn.c:113:filename(libafalg.so): libafalg.so: cannot open shared object file: No such file or directory
140473780422464:error:25070067:DSO support routines:DSO_load:could not load the shared library:crypto/dso/dso_lib.c:161:
140473780422464:error:260B6084:engine routines:dynamic_load:dso not found:crypto/engine/eng_dyn.c:414:
^C
--
openssl-dev mailing list
To unsubscribe: https://mta.openssl.org/mailman/listinfo/openssl-dev
Reply | Threaded
Open this post in threaded view
|

Re: afalg with OpenSSL 1.1.0f 25 May 2017

Matt Caswell-2
Comments inserted.

On 14/08/17 08:20, Jitendra Lulla wrote:

> Hi,
>
> I am trying to use afalg on Linux 4.9.37 with OpenSSL 1.1.0f.
>
> I am facing 2 issues:
>
> ONE: when I issue the speed command, I see the following:
>
> [root@localhost apps]# ./openssl speed -evp aes-128-cbc -engine afalg
> invalid engine "afalg"
> 139853452924736:error:2506406A:DSO support routines:dlfcn_bind_func:could not bind to the requested symbol name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine): /usr/local/lib64/engines-1.1/afalg.so: undefined symbol: bind_engine
> 139853452924736:error:2506C06A:DSO support routines:DSO_bind_func:could not bind to the requested symbol name:crypto/dso/dso_lib.c:185:
> 139853452924736:error:260B6068:engine routines:dynamic_load:DSO failure:crypto/engine/eng_dyn.c:427:
> 139853452924736:error:2606A074:engine routines:ENGINE_by_id:no such engine:crypto/engine/eng_list.c:339:id=afalg
> 139853452924736:error:25066067:DS
>
>
> nm afalg.so doesn't show bind_engine
>
Assuming you have already successfully built OpenSSL using "make", from
the "test" subdir of the directory where you downloaded the source, what
happens if you execute:

OPENSSL_ENGINES=../engines/afalg ../util/shlib_wrap.sh ./afalgtest

Another thing to try is (from the top level source dir)

touch engines/afalg/e_afalg.c
make

Check to see if there are any warnings generated during the compilation
of the engine.

>
> When I modify the openssl.cnf file with the engine name and the CIPHERS, still I dont get it working. The command output and the change in the openssl.cnf pasted at the end of the mail.
>
>
> TWO: I had to create a softlink to libcrypto.so.1.1 and libssl.so.1.1 like the following to make openssl command work:
> ln -s /usr/local/lib64/libssl.so.1.1 /lib64/libssl.so.1.1
> ln -s /usr/local/lib64/libcrypto.so.1.1 /lib64/libcrypto.so.1.1
>
> Is creating the softlinks a known issue and will be fixed?
No, this will not be fixed and may not be the most appropriate thing to
do on all systems.


Matt


>
> I have pasted the complete information about the OS/distro environment and installation commands I ran at the bottom.
> Could you please suggest what wrong I am doing to make afalg work.
>
> Thanks
> Jitendra Lulla
>
> ========
>
>
> BEFORE INSTALLATION:
>
> [root@localhost jlulla]# rpm -qa  |grep openssl
> openssl-1.0.1e-60.el7.x86_64
> openssl-devel-1.0.1e-60.el7.x86_64
> openssl-libs-1.0.1e-60.el7.x86_64
>
> [root@localhost jlulla]# openssl version
> OpenSSL 1.0.1e-fips 11 Feb 2013
>
>
>
> PLEASE SEE FROM HERE PLEASE SEE FROM HERE PLEASE SEE FROM HERE----------------------------
>
> STEP 1 : SOURCE TAKEN FROM https://www.openssl.org/source/openssl-1.1.0f.tar.gz 2017-May-25 13:09:51
>
> [root@localhost jlulla]# uname -a
> Linux localhost.localdomain 4.9.37 #1 SMP Fri Jul 21 04:52:46 PDT 2017 x86_64 x86_64 x86_64 GNU/Linux
>
> [root@localhost jlulla]# cat /etc/redhat-release
> Red Hat Enterprise Linux Server release 7.3 (Maipo)
>
>
>
> [root@localhost openssl-1.1.0f]# pwd
> /home/jlulla/openssl-1.1.0f
>
> STEP 2: [root@localhost openssl-1.1.0f]# ./config shared enable-engine enable-dso enable-afalgeng
> Operating system: x86_64-whatever-linux2
> Configuring for linux-x86_64
> Configuring OpenSSL version 1.1.0f (0x1010006fL)
>     no-asan        [default]  OPENSSL_NO_ASAN
>     no-crypto-mdebug [default]  OPENSSL_NO_CRYPTO_MDEBUG
>     no-crypto-mdebug-backtrace [default]  OPENSSL_NO_CRYPTO_MDEBUG_BACKTRACE
>     no-ec_nistp_64_gcc_128 [default]  OPENSSL_NO_EC_NISTP_64_GCC_128
>     no-egd          [default]  OPENSSL_NO_EGD
>     no-fuzz-afl    [default]  OPENSSL_NO_FUZZ_AFL
>     no-fuzz-libfuzzer [default]  OPENSSL_NO_FUZZ_LIBFUZZER
>     no-heartbeats  [default]  OPENSSL_NO_HEARTBEATS
>     no-md2          [default]  OPENSSL_NO_MD2 (skip dir)
>     no-msan        [default]  OPENSSL_NO_MSAN
>     no-rc5          [default]  OPENSSL_NO_RC5 (skip dir)
>     no-sctp        [default]  OPENSSL_NO_SCTP
>     no-ssl-trace    [default]  OPENSSL_NO_SSL_TRACE
>     no-ssl3        [default]  OPENSSL_NO_SSL3
>     no-ssl3-method  [default]  OPENSSL_NO_SSL3_METHOD
>     no-ubsan        [default]  OPENSSL_NO_UBSAN
>     no-unit-test    [default]  OPENSSL_NO_UNIT_TEST
>     no-weak-ssl-ciphers [default]  OPENSSL_NO_WEAK_SSL_CIPHERS
>     no-zlib        [default]
>     no-zlib-dynamic [default]
> Configuring for linux-x86_64
> CC            =gcc
> CFLAG        =-Wall -O3 -pthread -m64 -DL_ENDIAN  -Wa,--noexecstack
> SHARED_CFLAG  =-fPIC -DOPENSSL_USE_NODELETE
> DEFINES      =DSO_DLFCN HAVE_DLFCN_H NDEBUG OPENSSL_THREADS OPENSSL_NO_STATIC_ENGINE OPENSSL_PIC OPENSSL_IA32_SSE2 OPENSSL_BN_ASM_MONT OPENSSL_BN_ASM_MONT5 OPENSSL_BN_ASM_GF2m SHA1_ASM SHA256_ASM SHA512_ASM RC4_ASM MD5_ASM AES_ASM VPAES_ASM BSAES_ASM GHASH_ASM ECP_NISTZ256_ASM PADLOCK_ASM POLY1305_ASM
> LFLAG        =
> PLIB_LFLAG    =
> EX_LIBS      =-ldl
> APPS_OBJ      =
> CPUID_OBJ    =x86_64cpuid.o
> UPLINK_OBJ    =
> BN_ASM        =asm/x86_64-gcc.o x86_64-mont.o x86_64-mont5.o x86_64-gf2m.o rsaz_exp.o rsaz-x86_64.o rsaz-avx2.o
> EC_ASM        =ecp_nistz256.o ecp_nistz256-x86_64.o
> DES_ENC      =des_enc.o fcrypt_b.o
> AES_ENC      =aes-x86_64.o vpaes-x86_64.o bsaes-x86_64.o aesni-x86_64.o aesni-sha1-x86_64.o aesni-sha256-x86_64.o aesni-mb-x86_64.o
> BF_ENC        =bf_enc.o
> CAST_ENC      =c_enc.o
> RC4_ENC      =rc4-x86_64.o rc4-md5-x86_64.o
> RC5_ENC      =rc5_enc.o
> MD5_OBJ_ASM  =md5-x86_64.o
> SHA1_OBJ_ASM  =sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o sha1-mb-x86_64.o sha256-mb-x86_64.o
> RMD160_OBJ_ASM=
> CMLL_ENC      =cmll-x86_64.o cmll_misc.o
> MODES_OBJ    =ghash-x86_64.o aesni-gcm-x86_64.o
> PADLOCK_OBJ  =e_padlock-x86_64.o
> CHACHA_ENC    =chacha-x86_64.o
> POLY1305_OBJ  =poly1305-x86_64.o
> BLAKE2_OBJ    =
> PROCESSOR    =
> RANLIB        =ranlib
> ARFLAGS      =
> PERL          =/usr/bin/perl
>
> SIXTY_FOUR_BIT_LONG mode
>
> Configured for linux-x86_64.
> [root@localhost openssl-1.1.0f]#
>
> make didnt give any error.
>
> make install didnt give any error
>
> updatedb
>
> STEP 2:
> [root@localhost openssl-1.1.0f]# md5sum /home/jlulla/openssl-1.1.0f/libssl.so.1.1 /usr/local/lib64/libssl.so.1.1
> 5a7264a3ebda22989c831794d30677c5  /home/jlulla/openssl-1.1.0f/libssl.so.1.1
> 5a7264a3ebda22989c831794d30677c5  /usr/local/lib64/libssl.so.1.1
>
> [root@localhost openssl-1.1.0f]# ls -l /home/jlulla/openssl-1.1.0f/libssl.so
> lrwxrwxrwx. 1 root root 13 Aug 10 23:45 /home/jlulla/openssl-1.1.0f/libssl.so -> libssl.so.1.1
>
>
> [root@localhost apps]# pwd
> /home/jlulla/openssl-1.1.0f/apps
> [root@localhost apps]# ./openssl
> ./openssl: error while loading shared libraries: libssl.so.1.1: cannot open shared object file: No such file or directory
>
> [root@localhost apps]# ldd ./openssl
>         linux-vdso.so.1 =>  (0x00007ffd02f3c000)
>         libssl.so.1.1 => not found
>         libcrypto.so.1.1 => not found
>         libdl.so.2 => /lib64/libdl.so.2 (0x00007f0439fda000)
>         libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f0439dbe000)
>         libc.so.6 => /lib64/libc.so.6 (0x00007f04399fc000)
>         /lib64/ld-linux-x86-64.so.2 (0x000055d618530000)
>
>
> [root@localhost apps]# ls -l /lib64/libssl.so.1.1
> ls: cannot access /lib64/libssl.so.1.1: No such file or directory
>
> ln -s /usr/local/lib64/libssl.so.1.1 /lib64/libssl.so.1.1
>
> STEP 3:
> [root@localhost apps]# ln -s /usr/local/lib64/libssl.so.1.1 /lib64/libssl.so.1.1
> [root@localhost apps]# ls -l /lib64/libssl.so.1.1
> lrwxrwxrwx. 1 root root 30 Aug 10 23:57 /lib64/libssl.so.1.1 -> /usr/local/lib64/libssl.so.1.1
>
>
> [root@localhost apps]# ln -s /usr/local/lib64/libcrypto.so.1.1 /lib64/libcrypto.so.1.1
> [root@localhost apps]# ls -l /lib64/libcrypto.so.1.1
> lrwxrwxrwx. 1 root root 33 Aug 10 23:58 /lib64/libcrypto.so.1.1 -> /usr/local/lib64/libcrypto.so.1.1
>
> [root@localhost apps]# ldd ./openssl
>         linux-vdso.so.1 =>  (0x00007ffd37b5e000)
>         libssl.so.1.1 => /lib64/libssl.so.1.1 (0x00007f82881f8000)
>         libcrypto.so.1.1 => /lib64/libcrypto.so.1.1 (0x00007f8287d73000)
>         libdl.so.2 => /lib64/libdl.so.2 (0x00007f8287b6e000)
>         libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f8287952000)
>         libc.so.6 => /lib64/libc.so.6 (0x00007f8287591000)
>         /lib64/ld-linux-x86-64.so.2 (0x000055f06bc67000)
>
>
> [root@localhost apps]# ./openssl version
> OpenSSL 1.1.0f  25 May 2017
>
>
> STEP 4:
> [root@localhost afalg]# pwd
> /home/jlulla/openssl-1.1.0f/engines/afalg
>
> [root@localhost afalg]# ls
> afalg.so  build.info  e_afalg.c  e_afalg.d  e_afalg.ec  e_afalg_err.c  e_afalg_err.d  e_afalg_err.h  e_afalg_err.o  e_afalg.h  e_afalg.o
>
> [root@localhost afalg]# ldd afalg.so
>         linux-vdso.so.1 =>  (0x00007fff1d7ef000)
>         libcrypto.so.1.1 => /lib64/libcrypto.so.1.1 (0x00007f3a80166000)
>         libdl.so.2 => /lib64/libdl.so.2 (0x00007f3a7ff62000)
>         libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f3a7fd45000)
>         libc.so.6 => /lib64/libc.so.6 (0x00007f3a7f984000)
>         /lib64/ld-linux-x86-64.so.2 (0x0000560991976000)
>
>
> [root@localhost afalg]# nm afalg.so
> 0000000000202060 d AFALG_error_init
> 0000000000202220 b AFALG_lib_error_code
> 0000000000202160 d AFALG_str_functs
> 0000000000202080 d AFALG_str_reasons
> 0000000000202210 B __bss_start
> 0000000000202210 b completed.6344
>                 w __cxa_finalize@@GLIBC_2.2.5
> 0000000000000a00 t deregister_tm_clones
> 0000000000000a70 t __do_global_dtors_aux
> 0000000000201da0 t __do_global_dtors_aux_fini_array_entry
> 0000000000201db0 d __dso_handle
> 0000000000201db8 d _DYNAMIC
> 0000000000202210 D _edata
> 0000000000202228 B _end
> 0000000000000af0 T engine_load_afalg_int
> 0000000000000bb0 T ERR_AFALG_error
>                 U ERR_get_next_error_library@@OPENSSL_1_1_0
> 0000000000000b00 T ERR_load_AFALG_strings
>                 U ERR_load_strings@@OPENSSL_1_1_0
>                 U ERR_put_error@@OPENSSL_1_1_0
> 0000000000000b60 T ERR_unload_AFALG_strings
>                 U ERR_unload_strings@@OPENSSL_1_1_0
> 0000000000000bf8 T _fini
> 0000000000000ab0 t frame_dummy
> 0000000000201d98 t __frame_dummy_init_array_entry
> 0000000000000eb8 r __FRAME_END__
> 0000000000202000 d _GLOBAL_OFFSET_TABLE_
>                 w __gmon_start__
> 0000000000000970 T _init
>                 w _ITM_deregisterTMCloneTable
>                 w _ITM_registerTMCloneTable
> 0000000000201da8 d __JCR_END__
> 0000000000201da8 d __JCR_LIST__
>                 w _Jv_RegisterClasses
> 0000000000000a30 t register_tm_clones
> 0000000000202210 d __TMC_END__
>
>
> [root@localhost openssl-1.1.0f]# locate afalg.so
> /home/jlulla/openssl-1.1.0f/engines/afalg/afalg.so
> /usr/local/lib64/engines-1.1/afalg.so
>
>
> [root@localhost openssl-1.1.0f]# md5sum /home/jlulla/openssl-1.1.0f/engines/afalg/afalg.so /usr/local/lib64/engines-1.1/afalg.so
> ec273faa6eb6e25f55e44a7d37adf195  /home/jlulla/openssl-1.1.0f/engines/afalg/afalg.so
> ec273faa6eb6e25f55e44a7d37adf195  /usr/local/lib64/engines-1.1/afalg.so
>
>
> [root@localhost apps]# date
> Fri Aug 11 00:01:10 PDT 2017
>
>
> [root@localhost apps]# ls -l /usr/local/ssl/openssl.cnf
> -rw-r--r--. 1 root root 10771 Aug 10 23:47 /usr/local/ssl/openssl.cnf
>
> [root@localhost apps]# md5sum /usr/local/ssl/openssl.cnf /home/jlulla/openssl-1.1.0f/apps/openssl.cnf
> f697ef5df0d006882e6326606e8dbf4a  /usr/local/ssl/openssl.cnf
> f697ef5df0d006882e6326606e8dbf4a  /home/jlulla/openssl-1.1.0f/apps/openssl.cnf
>
>
> openssl.cnf has the following:
> ..
> ..
> # Extra OBJECT IDENTIFIER info:
> #oid_file              = $ENV::HOME/.oid
> oid_section            = new_oids
>
> # To use this configuration file with the "-extfile" option of the
> # "openssl x509" utility, name here the section containing the
> # X.509v3 extensions to use:
> # extensions            =
> # (Alternatively, use a configuration file that has only
> # X.509v3 extensions in its main [= default] section.)
>
> ..
> ..
>
> [root@localhost apps]# ./openssl speed -evp aes-128-cbc -engine afalg
> invalid engine "afalg"
> 139853452924736:error:2506406A:DSO support routines:dlfcn_bind_func:could not bind to the requested symbol name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine): /usr/local/lib64/engines-1.1/afalg.so: undefined symbol: bind_engine
> 139853452924736:error:2506C06A:DSO support routines:DSO_bind_func:could not bind to the requested symbol name:crypto/dso/dso_lib.c:185:
> 139853452924736:error:260B6068:engine routines:dynamic_load:DSO failure:crypto/engine/eng_dyn.c:427:
> 139853452924736:error:2606A074:engine routines:ENGINE_by_id:no such engine:crypto/engine/eng_list.c:339:id=afalg
> 139853452924736:error:25066067:DSO support routines:dlfcn_load:could not load the shared library:crypto/dso/dso_dlfcn.c:113:filename(libafalg.so): libafalg.so: cannot open shared object file: No such file or directory
> 139853452924736:error:25070067:DSO support routines:DSO_load:could not load the shared library:crypto/dso/dso_lib.c:161:
> 139853452924736:error:260B6084:engine routines:dynamic_load:dso not found:crypto/engine/eng_dyn.c:414:
> ^C
>
>
> Modified both the files as the follwing:
> /usr/local/ssl/openssl.cnf
> /home/jlulla/openssl-1.1.0f/apps/openssl.cnf
>
> # Extra OBJECT IDENTIFIER info:
> #oid_file              = $ENV::HOME/.oid
> oid_section            = new_oids
>
> openssl_conf = openssl_def
>
> [openssl_def]
> engines = openssl_engines
>
> [openssl_engines]
> afalg = afalg_engine
>
> [afalg_engine]
> CIPHERS=aes-128-cbc
>
> With the above, the errors are more:
> [root@localhost apps]# ./openssl speed -evp aes-128-cbc -engine afalg
> invalid engine "afalg"
> 140473780422464:error:2506406A:DSO support routines:dlfcn_bind_func:could not bind to the requested symbol name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine): /usr/local/lib64/engines-1.1/afalg.so: undefined symbol: bind_engine
> 140473780422464:error:2506C06A:DSO support routines:DSO_bind_func:could not bind to the requested symbol name:crypto/dso/dso_lib.c:185:
> 140473780422464:error:260B6068:engine routines:dynamic_load:DSO failure:crypto/engine/eng_dyn.c:427:
> 140473780422464:error:2606A074:engine routines:ENGINE_by_id:no such engine:crypto/engine/eng_list.c:339:id=afalg
> 140473780422464:error:260BC066:engine routines:int_engine_configure:engine configuration error:crypto/engine/eng_cnf.c:141:section=afalg_engine, name=CIPHERS, value=aes-128-cbc
> 140473780422464:error:0E07606D:configuration file routines:module_run:module initialization error:crypto/conf/conf_mod.c:173:module=engines, value=openssl_engines, retcode=-1
> 140473780422464:error:2506406A:DSO support routines:dlfcn_bind_func:could not bind to the requested symbol name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine): /usr/local/lib64/engines-1.1/afalg.so: undefined symbol: bind_engine
> 140473780422464:error:2506C06A:DSO support routines:DSO_bind_func:could not bind to the requested symbol name:crypto/dso/dso_lib.c:185:
> 140473780422464:error:260B6068:engine routines:dynamic_load:DSO failure:crypto/engine/eng_dyn.c:427:
> 140473780422464:error:2606A074:engine routines:ENGINE_by_id:no such engine:crypto/engine/eng_list.c:339:id=afalg
> 140473780422464:error:25066067:DSO support routines:dlfcn_load:could not load the shared library:crypto/dso/dso_dlfcn.c:113:filename(libafalg.so): libafalg.so: cannot open shared object file: No such file or directory
> 140473780422464:error:25070067:DSO support routines:DSO_load:could not load the shared library:crypto/dso/dso_lib.c:161:
> 140473780422464:error:260B6084:engine routines:dynamic_load:dso not found:crypto/engine/eng_dyn.c:414:
> ^C
>
--
openssl-dev mailing list
To unsubscribe: https://mta.openssl.org/mailman/listinfo/openssl-dev
Reply | Threaded
Open this post in threaded view
|

Re: afalg with OpenSSL 1.1.0f 25 May 2017

OpenSSL - Dev mailing list
Hi Matt,


I have linux 4.9.37 on RHEL7.3.
[root@localhost jlulla]# uname -a
Linux localhost.localdomain 4.9.37 #1 SMP Fri Jul 21 04:52:46 PDT 2017 x86_64 x86_64 x86_64 GNU/Linux


[root@localhost test]# OPENSSL_ENGINES=../engines/afalg ../util/shlib_wrap.sh ./afalgtest
AFALG not supported - skipping AFALG tests
PASS
[root@localhost test]#


I am getting here:
# if LINUX_VERSION_CODE <= KERNEL_VERSION(K_MAJ, K_MIN1, K_MIN2)
/*
 * If we get here then it looks like there is a mismatch between the linux
 * headers and the actual kernel version, so we have tried to compile with
 * afalg support, but then skipped it in e_afalg.c. As far as this test is
 * concerned we behave as if we had been configured without support
 */
#  define OPENSSL_NO_AFALGENG
# endif


Following is the value for KERNEL_VERSION for me:

[root@localhost jlulla]# ./kernelversion (program at the bottom of this mail)
KERNEL_VERSION: 262400
LINUX_VERSION_CODE 199168
condition:1


Where should I look to fix it?

Thanks
Jitrendra


[root@localhost jlulla]# cat kernelversion.c
#define LINUX_VERSION_CODE 199168
#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))
#define RHEL_MAJOR 7
#define RHEL_MINOR 3
#define RHEL_RELEASE_VERSION(a,b) (((a) << 8) + (b))
#define RHEL_RELEASE_CODE 1795
#define RHEL_RELEASE "514"

# define K_MAJ   4
# define K_MIN1  1
# define K_MIN2  0
#include<stdio.h>

int main()
{
        printf("KERNEL_VERSION: %d\n",  KERNEL_VERSION(K_MAJ, K_MIN1, K_MIN2));
        printf("LINUX_VERSION_CODE %d\n", LINUX_VERSION_CODE);
        printf("condition:%d\n",
                        (LINUX_VERSION_CODE <= KERNEL_VERSION(K_MAJ, K_MIN1, K_MIN2)));
}



--------------------------------------------
On Mon, 8/14/17, Matt Caswell <[hidden email]> wrote:

 Subject: Re: afalg with OpenSSL 1.1.0f 25 May 2017
 To: "[hidden email]" <[hidden email]>
 Cc: "Jitendra Lulla" <[hidden email]>
 Date: Monday, August 14, 2017, 3:44 PM
 
 Comments inserted.
 
 On 14/08/17 08:20, Jitendra
 Lulla wrote:
 > Hi,
 >
 
 > I am trying to use afalg on Linux
 4.9.37 with OpenSSL 1.1.0f.
 >
 > I am facing 2 issues:
 >
 
 > ONE: when I issue the speed command, I
 see the following:
 >
 > [root@localhost
 apps]# ./openssl speed -evp aes-128-cbc -engine afalg
 > invalid engine "afalg"
 > 139853452924736:error:2506406A:DSO support
 routines:dlfcn_bind_func:could not bind to the requested
 symbol name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine):
 /usr/local/lib64/engines-1.1/afalg.so: undefined symbol:
 bind_engine
 >
 139853452924736:error:2506C06A:DSO support
 routines:DSO_bind_func:could not bind to the requested
 symbol name:crypto/dso/dso_lib.c:185:
 >
 139853452924736:error:260B6068:engine
 routines:dynamic_load:DSO
 failure:crypto/engine/eng_dyn.c:427:
 >
 139853452924736:error:2606A074:engine
 routines:ENGINE_by_id:no such
 engine:crypto/engine/eng_list.c:339:id=afalg
 > 139853452924736:error:25066067:DS
 >
 >
 > nm afalg.so doesn't show
 bind_engine
 >
 Assuming
 you have already successfully built OpenSSL using
 "make", from
 the "test"
 subdir of the directory where you downloaded the source,
 what
 happens if you execute:
 
 OPENSSL_ENGINES=../engines/afalg
 ../util/shlib_wrap.sh ./afalgtest
 
 Another thing to try is (from the top level
 source dir)
 
 touch
 engines/afalg/e_afalg.c
 make
 
 Check to see if there are any
 warnings generated during the compilation
 of
 the engine.
 
 >
 > When I modify the openssl.cnf file with
 the engine name and the CIPHERS, still I dont get it
 working. The command output and the change in the
 openssl.cnf pasted at the end of the mail.
 >
 >
 > TWO: I had to create a softlink to
 libcrypto.so.1.1 and libssl.so.1.1 like the following to
 make openssl command work:
 > ln -s
 /usr/local/lib64/libssl.so.1.1 /lib64/libssl.so.1.1
 > ln -s /usr/local/lib64/libcrypto.so.1.1
 /lib64/libcrypto.so.1.1
 >
 > Is creating the softlinks a known issue
 and will be fixed?
 No, this will not be
 fixed and may not be the most appropriate thing to
 do on all systems.
 
 
 Matt
 
 
 >
 > I have pasted the
 complete information about the OS/distro environment and
 installation commands I ran at the bottom.
 > Could you please suggest what wrong I am
 doing to make afalg work.
 >
 > Thanks
 > Jitendra
 Lulla
 >
 > ========
 >
 >
 > BEFORE INSTALLATION:
 >
 
 > [root@localhost
 jlulla]# rpm -qa  |grep openssl
 >
 openssl-1.0.1e-60.el7.x86_64
 >
 openssl-devel-1.0.1e-60.el7.x86_64
 >
 openssl-libs-1.0.1e-60.el7.x86_64
 >
 > [root@localhost
 jlulla]# openssl version
 > OpenSSL
 1.0.1e-fips 11 Feb 2013
 >
 >
 >
 > PLEASE SEE FROM HERE PLEASE SEE FROM HERE
 PLEASE SEE FROM HERE----------------------------
 >
 > STEP 1 : SOURCE
 TAKEN FROM https://www.openssl.org/source/openssl-1.1.0f.tar.gz
 2017-May-25 13:09:51
 >
 > [root@localhost
 jlulla]# uname -a
 > Linux
 localhost.localdomain 4.9.37 #1 SMP Fri Jul 21 04:52:46 PDT
 2017 x86_64 x86_64 x86_64 GNU/Linux
 >
 > [root@localhost
 jlulla]# cat /etc/redhat-release
 > Red
 Hat Enterprise Linux Server release 7.3 (Maipo)
 >
 >
 >
 > [root@localhost
 openssl-1.1.0f]# pwd
 >
 /home/jlulla/openssl-1.1.0f
 >
 > STEP 2: [root@localhost
 openssl-1.1.0f]# ./config shared enable-engine enable-dso
 enable-afalgeng
 > Operating system:
 x86_64-whatever-linux2
 > Configuring for
 linux-x86_64
 > Configuring OpenSSL
 version 1.1.0f (0x1010006fL)
 >   
 no-asan        [default]  OPENSSL_NO_ASAN
 >     no-crypto-mdebug [default] 
 OPENSSL_NO_CRYPTO_MDEBUG
 >   
 no-crypto-mdebug-backtrace [default] 
 OPENSSL_NO_CRYPTO_MDEBUG_BACKTRACE
 >   
  no-ec_nistp_64_gcc_128 [default] 
 OPENSSL_NO_EC_NISTP_64_GCC_128
 >   
 no-egd          [default]  OPENSSL_NO_EGD
 >     no-fuzz-afl    [default] 
 OPENSSL_NO_FUZZ_AFL
 >   
 no-fuzz-libfuzzer [default]  OPENSSL_NO_FUZZ_LIBFUZZER
 >     no-heartbeats  [default] 
 OPENSSL_NO_HEARTBEATS
 >     no-md2   
       [default]  OPENSSL_NO_MD2 (skip dir)
 >     no-msan        [default] 
 OPENSSL_NO_MSAN
 >     no-rc5       
   [default]  OPENSSL_NO_RC5 (skip dir)
 >     no-sctp        [default] 
 OPENSSL_NO_SCTP
 >     no-ssl-trace   
 [default]  OPENSSL_NO_SSL_TRACE
 >   
 no-ssl3        [default]  OPENSSL_NO_SSL3
 >     no-ssl3-method  [default] 
 OPENSSL_NO_SSL3_METHOD
 >     no-ubsan 
       [default]  OPENSSL_NO_UBSAN
 > 
    no-unit-test    [default]  OPENSSL_NO_UNIT_TEST
 >     no-weak-ssl-ciphers [default] 
 OPENSSL_NO_WEAK_SSL_CIPHERS
 >   
 no-zlib        [default]
 >   
 no-zlib-dynamic [default]
 > Configuring
 for linux-x86_64
 > CC           
 =gcc
 > CFLAG        =-Wall -O3
 -pthread -m64 -DL_ENDIAN  -Wa,--noexecstack
 > SHARED_CFLAG  =-fPIC
 -DOPENSSL_USE_NODELETE
 > DEFINES     
 =DSO_DLFCN HAVE_DLFCN_H NDEBUG OPENSSL_THREADS
 OPENSSL_NO_STATIC_ENGINE OPENSSL_PIC OPENSSL_IA32_SSE2
 OPENSSL_BN_ASM_MONT OPENSSL_BN_ASM_MONT5 OPENSSL_BN_ASM_GF2m
 SHA1_ASM SHA256_ASM SHA512_ASM RC4_ASM MD5_ASM AES_ASM
 VPAES_ASM BSAES_ASM GHASH_ASM ECP_NISTZ256_ASM PADLOCK_ASM
 POLY1305_ASM
 > LFLAG        =
 > PLIB_LFLAG    =
 >
 EX_LIBS      =-ldl
 > APPS_OBJ     
 =
 > CPUID_OBJ    =x86_64cpuid.o
 > UPLINK_OBJ    =
 >
 BN_ASM        =asm/x86_64-gcc.o x86_64-mont.o
 x86_64-mont5.o x86_64-gf2m.o rsaz_exp.o rsaz-x86_64.o
 rsaz-avx2.o
 > EC_ASM       
 =ecp_nistz256.o ecp_nistz256-x86_64.o
 >
 DES_ENC      =des_enc.o fcrypt_b.o
 >
 AES_ENC      =aes-x86_64.o vpaes-x86_64.o bsaes-x86_64.o
 aesni-x86_64.o aesni-sha1-x86_64.o aesni-sha256-x86_64.o
 aesni-mb-x86_64.o
 > BF_ENC       
 =bf_enc.o
 > CAST_ENC      =c_enc.o
 > RC4_ENC      =rc4-x86_64.o
 rc4-md5-x86_64.o
 > RC5_ENC     
 =rc5_enc.o
 > MD5_OBJ_ASM 
 =md5-x86_64.o
 > SHA1_OBJ_ASM 
 =sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o
 sha1-mb-x86_64.o sha256-mb-x86_64.o
 >
 RMD160_OBJ_ASM=
 > CMLL_ENC     
 =cmll-x86_64.o cmll_misc.o
 > MODES_OBJ 
   =ghash-x86_64.o aesni-gcm-x86_64.o
 >
 PADLOCK_OBJ  =e_padlock-x86_64.o
 >
 CHACHA_ENC    =chacha-x86_64.o
 >
 POLY1305_OBJ  =poly1305-x86_64.o
 >
 BLAKE2_OBJ    =
 > PROCESSOR    =
 > RANLIB        =ranlib
 > ARFLAGS      =
 >
 PERL          =/usr/bin/perl
 >
 > SIXTY_FOUR_BIT_LONG mode
 >
 > Configured for
 linux-x86_64.
 > [root@localhost
 openssl-1.1.0f]#
 >
 >
 make didnt give any error.
 >
 > make install didnt give any error
 >
 > updatedb
 >
 > STEP 2:
 > [root@localhost
 openssl-1.1.0f]# md5sum
 /home/jlulla/openssl-1.1.0f/libssl.so.1.1
 /usr/local/lib64/libssl.so.1.1
 >
 5a7264a3ebda22989c831794d30677c5 
 /home/jlulla/openssl-1.1.0f/libssl.so.1.1
 > 5a7264a3ebda22989c831794d30677c5 
 /usr/local/lib64/libssl.so.1.1
 >
 > [root@localhost
 openssl-1.1.0f]# ls -l
 /home/jlulla/openssl-1.1.0f/libssl.so
 >
 lrwxrwxrwx. 1 root root 13 Aug 10 23:45
 /home/jlulla/openssl-1.1.0f/libssl.so -> libssl.so.1.1
 >
 >
 > [root@localhost
 apps]# pwd
 >
 /home/jlulla/openssl-1.1.0f/apps
 > [root@localhost
 apps]# ./openssl
 > ./openssl: error while
 loading shared libraries: libssl.so.1.1: cannot open shared
 object file: No such file or directory
 >
 
 > [root@localhost
 apps]# ldd ./openssl
 >       
 linux-vdso.so.1 =>  (0x00007ffd02f3c000)
 >         libssl.so.1.1 => not
 found
 >         libcrypto.so.1.1
 => not found
 >         libdl.so.2
 => /lib64/libdl.so.2 (0x00007f0439fda000)
 >         libpthread.so.0 =>
 /lib64/libpthread.so.0 (0x00007f0439dbe000)
 >         libc.so.6 =>
 /lib64/libc.so.6 (0x00007f04399fc000)
 > 
        /lib64/ld-linux-x86-64.so.2
 (0x000055d618530000)
 >
 >
 > [root@localhost
 apps]# ls -l /lib64/libssl.so.1.1
 > ls:
 cannot access /lib64/libssl.so.1.1: No such file or
 directory
 >
 > ln -s
 /usr/local/lib64/libssl.so.1.1 /lib64/libssl.so.1.1
 >
 > STEP 3:
 > [root@localhost
 apps]# ln -s /usr/local/lib64/libssl.so.1.1
 /lib64/libssl.so.1.1
 > [root@localhost
 apps]# ls -l /lib64/libssl.so.1.1
 >
 lrwxrwxrwx. 1 root root 30 Aug 10 23:57 /lib64/libssl.so.1.1
 -> /usr/local/lib64/libssl.so.1.1
 >
 
 >
 > [root@localhost
 apps]# ln -s /usr/local/lib64/libcrypto.so.1.1
 /lib64/libcrypto.so.1.1
 > [root@localhost
 apps]# ls -l /lib64/libcrypto.so.1.1
 >
 lrwxrwxrwx. 1 root root 33 Aug 10 23:58
 /lib64/libcrypto.so.1.1 ->
 /usr/local/lib64/libcrypto.so.1.1
 >
 > [root@localhost
 apps]# ldd ./openssl
 >       
 linux-vdso.so.1 =>  (0x00007ffd37b5e000)
 >         libssl.so.1.1 =>
 /lib64/libssl.so.1.1 (0x00007f82881f8000)
 >         libcrypto.so.1.1 =>
 /lib64/libcrypto.so.1.1 (0x00007f8287d73000)
 >         libdl.so.2 =>
 /lib64/libdl.so.2 (0x00007f8287b6e000)
 >         libpthread.so.0 =>
 /lib64/libpthread.so.0 (0x00007f8287952000)
 >         libc.so.6 =>
 /lib64/libc.so.6 (0x00007f8287591000)
 > 
        /lib64/ld-linux-x86-64.so.2
 (0x000055f06bc67000)
 >
 >
 > [root@localhost
 apps]# ./openssl version
 > OpenSSL
 1.1.0f  25 May 2017
 >
 >
 > STEP 4:
 > [root@localhost
 afalg]# pwd
 >
 /home/jlulla/openssl-1.1.0f/engines/afalg
 >
 > [root@localhost
 afalg]# ls
 > afalg.so  build.info 
 e_afalg.c  e_afalg.d  e_afalg.ec  e_afalg_err.c 
 e_afalg_err.d  e_afalg_err.h  e_afalg_err.o  e_afalg.h 
 e_afalg.o
 >
 > [root@localhost
 afalg]# ldd afalg.so
 >       
 linux-vdso.so.1 =>  (0x00007fff1d7ef000)
 >         libcrypto.so.1.1 =>
 /lib64/libcrypto.so.1.1 (0x00007f3a80166000)
 >         libdl.so.2 =>
 /lib64/libdl.so.2 (0x00007f3a7ff62000)
 >         libpthread.so.0 =>
 /lib64/libpthread.so.0 (0x00007f3a7fd45000)
 >         libc.so.6 =>
 /lib64/libc.so.6 (0x00007f3a7f984000)
 > 
        /lib64/ld-linux-x86-64.so.2
 (0x0000560991976000)
 >
 >
 > [root@localhost
 afalg]# nm afalg.so
 > 0000000000202060 d
 AFALG_error_init
 > 0000000000202220 b
 AFALG_lib_error_code
 > 0000000000202160 d
 AFALG_str_functs
 > 0000000000202080 d
 AFALG_str_reasons
 > 0000000000202210 B
 __bss_start
 > 0000000000202210 b
 completed.6344
 >               
 w __cxa_finalize@@GLIBC_2.2.5
 >
 0000000000000a00 t deregister_tm_clones
 >
 0000000000000a70 t __do_global_dtors_aux
 > 0000000000201da0 t
 __do_global_dtors_aux_fini_array_entry
 >
 0000000000201db0 d __dso_handle
 >
 0000000000201db8 d _DYNAMIC
 >
 0000000000202210 D _edata
 >
 0000000000202228 B _end
 >
 0000000000000af0 T engine_load_afalg_int
 > 0000000000000bb0 T ERR_AFALG_error
 >                 U
 ERR_get_next_error_library@@OPENSSL_1_1_0
 > 0000000000000b00 T
 ERR_load_AFALG_strings
 >           
      U ERR_load_strings@@OPENSSL_1_1_0
 >                 U
 ERR_put_error@@OPENSSL_1_1_0
 >
 0000000000000b60 T ERR_unload_AFALG_strings
 >                 U
 ERR_unload_strings@@OPENSSL_1_1_0
 >
 0000000000000bf8 T _fini
 >
 0000000000000ab0 t frame_dummy
 >
 0000000000201d98 t __frame_dummy_init_array_entry
 > 0000000000000eb8 r __FRAME_END__
 > 0000000000202000 d
 _GLOBAL_OFFSET_TABLE_
 >           
      w __gmon_start__
 >
 0000000000000970 T _init
 >         
        w _ITM_deregisterTMCloneTable
 >                 w
 _ITM_registerTMCloneTable
 >
 0000000000201da8 d __JCR_END__
 >
 0000000000201da8 d __JCR_LIST__
 >     
            w _Jv_RegisterClasses
 >
 0000000000000a30 t register_tm_clones
 >
 0000000000202210 d __TMC_END__
 >
 >
 > [root@localhost
 openssl-1.1.0f]# locate afalg.so
 >
 /home/jlulla/openssl-1.1.0f/engines/afalg/afalg.so
 > /usr/local/lib64/engines-1.1/afalg.so
 >
 >
 > [root@localhost
 openssl-1.1.0f]# md5sum
 /home/jlulla/openssl-1.1.0f/engines/afalg/afalg.so
 /usr/local/lib64/engines-1.1/afalg.so
 >
 ec273faa6eb6e25f55e44a7d37adf195 
 /home/jlulla/openssl-1.1.0f/engines/afalg/afalg.so
 > ec273faa6eb6e25f55e44a7d37adf195 
 /usr/local/lib64/engines-1.1/afalg.so
 >
 
 >
 > [root@localhost
 apps]# date
 > Fri Aug 11 00:01:10 PDT
 2017
 >
 >
 > [root@localhost
 apps]# ls -l /usr/local/ssl/openssl.cnf
 >
 -rw-r--r--. 1 root root 10771 Aug 10 23:47
 /usr/local/ssl/openssl.cnf
 >
 > [root@localhost
 apps]# md5sum /usr/local/ssl/openssl.cnf
 /home/jlulla/openssl-1.1.0f/apps/openssl.cnf
 > f697ef5df0d006882e6326606e8dbf4a 
 /usr/local/ssl/openssl.cnf
 >
 f697ef5df0d006882e6326606e8dbf4a 
 /home/jlulla/openssl-1.1.0f/apps/openssl.cnf
 >
 >
 > openssl.cnf has the following:
 > ..
 > ..
 > # Extra OBJECT IDENTIFIER info:
 > #oid_file              =
 $ENV::HOME/.oid
 > oid_section       
     = new_oids
 >
 >
 # To use this configuration file with the
 "-extfile" option of the
 > #
 "openssl x509" utility, name here the section
 containing the
 > # X.509v3 extensions to
 use:
 > # extensions            =
 > # (Alternatively, use a configuration file
 that has only
 > # X.509v3 extensions in
 its main [= default] section.)
 >
 > ..
 > ..
 >
 > [root@localhost
 apps]# ./openssl speed -evp aes-128-cbc -engine afalg
 > invalid engine "afalg"
 > 139853452924736:error:2506406A:DSO support
 routines:dlfcn_bind_func:could not bind to the requested
 symbol name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine):
 /usr/local/lib64/engines-1.1/afalg.so: undefined symbol:
 bind_engine
 >
 139853452924736:error:2506C06A:DSO support
 routines:DSO_bind_func:could not bind to the requested
 symbol name:crypto/dso/dso_lib.c:185:
 >
 139853452924736:error:260B6068:engine
 routines:dynamic_load:DSO
 failure:crypto/engine/eng_dyn.c:427:
 >
 139853452924736:error:2606A074:engine
 routines:ENGINE_by_id:no such
 engine:crypto/engine/eng_list.c:339:id=afalg
 > 139853452924736:error:25066067:DSO support
 routines:dlfcn_load:could not load the shared
 library:crypto/dso/dso_dlfcn.c:113:filename(libafalg.so):
 libafalg.so: cannot open shared object file: No such file or
 directory
 >
 139853452924736:error:25070067:DSO support
 routines:DSO_load:could not load the shared
 library:crypto/dso/dso_lib.c:161:
 >
 139853452924736:error:260B6084:engine
 routines:dynamic_load:dso not
 found:crypto/engine/eng_dyn.c:414:
 >
 ^C
 >
 >
 > Modified both the files as the
 follwing:
 > /usr/local/ssl/openssl.cnf
 >
 /home/jlulla/openssl-1.1.0f/apps/openssl.cnf
 >
 > # Extra OBJECT
 IDENTIFIER info:
 > #oid_file       
       = $ENV::HOME/.oid
 >
 oid_section            = new_oids
 >
 
 > openssl_conf = openssl_def
 >
 > [openssl_def]
 > engines = openssl_engines
 >
 > [openssl_engines]
 > afalg = afalg_engine
 >
 
 > [afalg_engine]
 >
 CIPHERS=aes-128-cbc
 >
 > With the above, the errors are more:
 > [root@localhost
 apps]# ./openssl speed -evp aes-128-cbc -engine afalg
 > invalid engine "afalg"
 > 140473780422464:error:2506406A:DSO support
 routines:dlfcn_bind_func:could not bind to the requested
 symbol name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine):
 /usr/local/lib64/engines-1.1/afalg.so: undefined symbol:
 bind_engine
 >
 140473780422464:error:2506C06A:DSO support
 routines:DSO_bind_func:could not bind to the requested
 symbol name:crypto/dso/dso_lib.c:185:
 >
 140473780422464:error:260B6068:engine
 routines:dynamic_load:DSO
 failure:crypto/engine/eng_dyn.c:427:
 >
 140473780422464:error:2606A074:engine
 routines:ENGINE_by_id:no such
 engine:crypto/engine/eng_list.c:339:id=afalg
 > 140473780422464:error:260BC066:engine
 routines:int_engine_configure:engine configuration
 error:crypto/engine/eng_cnf.c:141:section=afalg_engine,
 name=CIPHERS, value=aes-128-cbc
 >
 140473780422464:error:0E07606D:configuration file
 routines:module_run:module initialization
 error:crypto/conf/conf_mod.c:173:module=engines,
 value=openssl_engines, retcode=-1
 >
 140473780422464:error:2506406A:DSO support
 routines:dlfcn_bind_func:could not bind to the requested
 symbol name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine):
 /usr/local/lib64/engines-1.1/afalg.so: undefined symbol:
 bind_engine
 >
 140473780422464:error:2506C06A:DSO support
 routines:DSO_bind_func:could not bind to the requested
 symbol name:crypto/dso/dso_lib.c:185:
 >
 140473780422464:error:260B6068:engine
 routines:dynamic_load:DSO
 failure:crypto/engine/eng_dyn.c:427:
 >
 140473780422464:error:2606A074:engine
 routines:ENGINE_by_id:no such
 engine:crypto/engine/eng_list.c:339:id=afalg
 > 140473780422464:error:25066067:DSO support
 routines:dlfcn_load:could not load the shared
 library:crypto/dso/dso_dlfcn.c:113:filename(libafalg.so):
 libafalg.so: cannot open shared object file: No such file or
 directory
 >
 140473780422464:error:25070067:DSO support
 routines:DSO_load:could not load the shared
 library:crypto/dso/dso_lib.c:161:
 >
 140473780422464:error:260B6084:engine
 routines:dynamic_load:dso not
 found:crypto/engine/eng_dyn.c:414:
 >
 ^C
 >
 
--
openssl-dev mailing list
To unsubscribe: https://mta.openssl.org/mailman/listinfo/openssl-dev
Reply | Threaded
Open this post in threaded view
|

Re: afalg with OpenSSL 1.1.0f 25 May 2017

OpenSSL - Dev mailing list
In reply to this post by Matt Caswell-2
Hi Matt,

Thanks, I could find that the /usr/include/linux/version.h has #define LINUX_VERSION_CODE 199168 for my booted kernel 4.9.37. Which is why I see the following warnings also:

gcc  -Iinclude -DDSO_DLFCN -DHAVE_DLFCN_H -DNDEBUG -DOPENSSL_THREADS -DOPENSSL_NO_STATIC_ENGINE -DOPENSSL_PIC -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5 -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DRC4_ASM -DMD5_ASM -DAES_ASM -DVPAES_ASM -DBSAES_ASM -DGHASH_ASM -DECP_NISTZ256_ASM -DPADLOCK_ASM -DPOLY1305_ASM -DOPENSSLDIR="\"/usr/local/ssl\"" -DENGINESDIR="\"/usr/local/lib64/engines-1.1\"" -Wall -O3 -pthread -m64 -DL_ENDIAN  -Wa,--noexecstack -fPIC -DOPENSSL_USE_NODELETE -MMD -MF engines/afalg/e_afalg.d.tmp -MT engines/afalg/e_afalg.o -c -o engines/afalg/e_afalg.o engines/afalg/e_afalg.c
engines/afalg/e_afalg.c:30:4: warning: #warning "AFALG ENGINE requires Kernel Headers >= 4.1.0" [-Wcpp]
 #  warning "AFALG ENGINE requires Kernel Headers >= 4.1.0"
    ^
engines/afalg/e_afalg.c:31:4: warning: #warning "Skipping Compilation of AFALG engine" [-Wcpp]
 #  warning "Skipping Compilation of AFALG engine"


I will fix this problem now by having proper setup. Will update if I face any more issues.

Thanks
Jitendra




--------------------------------------------
On Wed, 8/16/17, Jitendra Lulla <[hidden email]> wrote:

 Subject: Re: afalg with OpenSSL 1.1.0f 25 May 2017
 To: "[hidden email]" <[hidden email]>, "Matt Caswell" <[hidden email]>
 Cc: "Jitendra Lulla" <[hidden email]>
 Date: Wednesday, August 16, 2017, 6:30 AM
 
 Hi Matt,
 
 
 I have linux 4.9.37 on RHEL7.3.
 [root@localhost
 jlulla]# uname -a
 Linux localhost.localdomain 4.9.37 #1
 SMP Fri Jul 21 04:52:46 PDT 2017 x86_64 x86_64 x86_64
 GNU/Linux
 
 
 [root@localhost
 test]# OPENSSL_ENGINES=../engines/afalg
 ../util/shlib_wrap.sh ./afalgtest
 AFALG not supported - skipping AFALG
 tests
 PASS
 [root@localhost
 test]#
 
 
 I am getting here:
 # if LINUX_VERSION_CODE <=
 KERNEL_VERSION(K_MAJ, K_MIN1, K_MIN2)
 /*
  * If we get here then it looks like
 there is a mismatch between the linux
  * headers and the actual kernel
 version, so we have tried to compile with
  * afalg support, but then skipped it
 in e_afalg.c. As far as this test is
  * concerned we behave as if we had
 been configured without support
  */
 #  define OPENSSL_NO_AFALGENG
 # endif
 
 
 Following is the value for
 KERNEL_VERSION for me:
 
 [root@localhost
 jlulla]# ./kernelversion (program at the bottom of this
 mail)
 KERNEL_VERSION: 262400
 LINUX_VERSION_CODE 199168
 condition:1
 
 
 Where should I look to fix it?
 
 Thanks
 Jitrendra
 
 
 [root@localhost
 jlulla]# cat kernelversion.c
 #define LINUX_VERSION_CODE 199168
 #define KERNEL_VERSION(a,b,c) (((a)
 << 16) + ((b) << 8) + (c))
 #define RHEL_MAJOR 7
 #define RHEL_MINOR 3
 #define RHEL_RELEASE_VERSION(a,b) (((a)
 << 8) + (b))
 #define RHEL_RELEASE_CODE 1795
 #define RHEL_RELEASE "514"
 
 # define K_MAJ   4
 # define K_MIN1  1
 # define K_MIN2  0
 #include<stdio.h>
 
 int main()
 {
        
 printf("KERNEL_VERSION: %d\n",  KERNEL_VERSION(K_MAJ,
 K_MIN1, K_MIN2));
        
 printf("LINUX_VERSION_CODE %d\n", LINUX_VERSION_CODE);
        
 printf("condition:%d\n",
          
              
 (LINUX_VERSION_CODE <= KERNEL_VERSION(K_MAJ, K_MIN1,
 K_MIN2)));
 }
 
 
 
 --------------------------------------------
 On Mon, 8/14/17, Matt Caswell <[hidden email]>
 wrote:
 
  Subject: Re: afalg with OpenSSL 1.1.0f
 25 May 2017
  To: "[hidden email]"
 <[hidden email]>
  Cc: "Jitendra Lulla" <[hidden email]>
  Date: Monday, August 14, 2017, 3:44
 PM
 
  Comments inserted.
 
  On 14/08/17 08:20, Jitendra
  Lulla wrote:
  > Hi,
  >
 
  > I am trying to use afalg on
 Linux
  4.9.37 with OpenSSL 1.1.0f.
  >
  > I am facing 2 issues:
  >
 
  > ONE: when I issue the speed
 command, I
  see the following:
  >
  > [root@localhost
  apps]# ./openssl speed -evp
 aes-128-cbc -engine afalg
  > invalid engine "afalg"
  >
 139853452924736:error:2506406A:DSO support
  routines:dlfcn_bind_func:could not
 bind to the requested
  symbol
 name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine):
  /usr/local/lib64/engines-1.1/afalg.so:
 undefined symbol:
  bind_engine
  >
  139853452924736:error:2506C06A:DSO
 support
  routines:DSO_bind_func:could not bind
 to the requested
  symbol name:crypto/dso/dso_lib.c:185:
  >
  139853452924736:error:260B6068:engine
  routines:dynamic_load:DSO
  failure:crypto/engine/eng_dyn.c:427:
  >
  139853452924736:error:2606A074:engine
  routines:ENGINE_by_id:no such
 
 engine:crypto/engine/eng_list.c:339:id=afalg
  >
 139853452924736:error:25066067:DS
  >
  >
  > nm afalg.so doesn't show
  bind_engine
  >
  Assuming
  you have already successfully built
 OpenSSL using
  "make", from
  the "test"
  subdir of the directory where you
 downloaded the source,
  what
  happens if you execute:
 
  OPENSSL_ENGINES=../engines/afalg
  ../util/shlib_wrap.sh ./afalgtest
 
  Another thing to try is (from the top
 level
  source dir)
 
  touch
  engines/afalg/e_afalg.c
  make
 
  Check to see if there are any
  warnings generated during the
 compilation
  of
  the engine.
 
  >
  > When I modify the openssl.cnf
 file with
  the engine name and the CIPHERS, still
 I dont get it
  working. The command output and the
 change in the
  openssl.cnf pasted at the end of the
 mail.
  >
  >
  > TWO: I had to create a softlink
 to
  libcrypto.so.1.1 and libssl.so.1.1
 like the following to
  make openssl command work:
  > ln -s
  /usr/local/lib64/libssl.so.1.1
 /lib64/libssl.so.1.1
  > ln -s
 /usr/local/lib64/libcrypto.so.1.1
  /lib64/libcrypto.so.1.1
  >
  > Is creating the softlinks a known
 issue
  and will be fixed?
  No, this will not be
  fixed and may not be the most
 appropriate thing to
  do on all systems.
 
 
  Matt
 
 
  >
  > I have pasted the
  complete information about the
 OS/distro environment and
  installation commands I ran at the
 bottom.
  > Could you please suggest what
 wrong I am
  doing to make afalg work.
  >
  > Thanks
  > Jitendra
  Lulla
  >
  > ========
  >
  >
  > BEFORE INSTALLATION:
  >
 
  > [root@localhost
  jlulla]# rpm -qa  |grep openssl
  >
  openssl-1.0.1e-60.el7.x86_64
  >
  openssl-devel-1.0.1e-60.el7.x86_64
  >
  openssl-libs-1.0.1e-60.el7.x86_64
  >
  > [root@localhost
  jlulla]# openssl version
  > OpenSSL
  1.0.1e-fips 11 Feb 2013
  >
  >
  >
  > PLEASE SEE FROM HERE PLEASE SEE
 FROM HERE
  PLEASE SEE FROM
 HERE----------------------------
  >
  > STEP 1 : SOURCE
  TAKEN FROM https://www.openssl.org/source/openssl-1.1.0f.tar.gz
  2017-May-25 13:09:51
  >
  > [root@localhost
  jlulla]# uname -a
  > Linux
  localhost.localdomain 4.9.37 #1 SMP
 Fri Jul 21 04:52:46 PDT
  2017 x86_64 x86_64 x86_64 GNU/Linux
  >
  > [root@localhost
  jlulla]# cat /etc/redhat-release
  > Red
  Hat Enterprise Linux Server release
 7.3 (Maipo)
  >
  >
  >
  > [root@localhost
  openssl-1.1.0f]# pwd
  >
  /home/jlulla/openssl-1.1.0f
  >
  > STEP 2: [root@localhost
  openssl-1.1.0f]# ./config shared
 enable-engine enable-dso
  enable-afalgeng
  > Operating system:
  x86_64-whatever-linux2
  > Configuring for
  linux-x86_64
  > Configuring OpenSSL
  version 1.1.0f (0x1010006fL)
  >   
  no-asan        [default] 
 OPENSSL_NO_ASAN
  >     no-crypto-mdebug
 [default] 
  OPENSSL_NO_CRYPTO_MDEBUG
  >   
  no-crypto-mdebug-backtrace
 [default] 
  OPENSSL_NO_CRYPTO_MDEBUG_BACKTRACE
  >   
   no-ec_nistp_64_gcc_128
 [default] 
  OPENSSL_NO_EC_NISTP_64_GCC_128
  >   
  no-egd          [default] 
 OPENSSL_NO_EGD
  >     no-fuzz-afl   
 [default] 
  OPENSSL_NO_FUZZ_AFL
  >   
  no-fuzz-libfuzzer [default] 
 OPENSSL_NO_FUZZ_LIBFUZZER
  >     no-heartbeats 
 [default] 
  OPENSSL_NO_HEARTBEATS
  >     no-md2   
        [default]  OPENSSL_NO_MD2
 (skip dir)
  >     no-msan       
 [default] 
  OPENSSL_NO_MSAN
  >     no-rc5       
    [default]  OPENSSL_NO_RC5 (skip
 dir)
  >     no-sctp       
 [default] 
  OPENSSL_NO_SCTP
  >     no-ssl-trace   
  [default]  OPENSSL_NO_SSL_TRACE
  >   
  no-ssl3        [default] 
 OPENSSL_NO_SSL3
  >     no-ssl3-method 
 [default] 
  OPENSSL_NO_SSL3_METHOD
  >     no-ubsan 
        [default]  OPENSSL_NO_UBSAN
  > 
     no-unit-test    [default] 
 OPENSSL_NO_UNIT_TEST
  >     no-weak-ssl-ciphers
 [default] 
  OPENSSL_NO_WEAK_SSL_CIPHERS
  >   
  no-zlib        [default]
  >   
  no-zlib-dynamic [default]
  > Configuring
  for linux-x86_64
  > CC           
  =gcc
  > CFLAG        =-Wall -O3
  -pthread -m64 -DL_ENDIAN 
 -Wa,--noexecstack
  > SHARED_CFLAG  =-fPIC
  -DOPENSSL_USE_NODELETE
  > DEFINES     
  =DSO_DLFCN HAVE_DLFCN_H NDEBUG
 OPENSSL_THREADS
  OPENSSL_NO_STATIC_ENGINE OPENSSL_PIC
 OPENSSL_IA32_SSE2
  OPENSSL_BN_ASM_MONT
 OPENSSL_BN_ASM_MONT5 OPENSSL_BN_ASM_GF2m
  SHA1_ASM SHA256_ASM SHA512_ASM RC4_ASM
 MD5_ASM AES_ASM
  VPAES_ASM BSAES_ASM GHASH_ASM
 ECP_NISTZ256_ASM PADLOCK_ASM
  POLY1305_ASM
  > LFLAG        =
  > PLIB_LFLAG    =
  >
  EX_LIBS      =-ldl
  > APPS_OBJ     
  =
  > CPUID_OBJ    =x86_64cpuid.o
  > UPLINK_OBJ    =
  >
  BN_ASM        =asm/x86_64-gcc.o
 x86_64-mont.o
  x86_64-mont5.o x86_64-gf2m.o
 rsaz_exp.o rsaz-x86_64.o
  rsaz-avx2.o
  > EC_ASM       
  =ecp_nistz256.o ecp_nistz256-x86_64.o
  >
  DES_ENC      =des_enc.o fcrypt_b.o
  >
  AES_ENC      =aes-x86_64.o
 vpaes-x86_64.o bsaes-x86_64.o
  aesni-x86_64.o aesni-sha1-x86_64.o
 aesni-sha256-x86_64.o
  aesni-mb-x86_64.o
  > BF_ENC       
  =bf_enc.o
  > CAST_ENC      =c_enc.o
  > RC4_ENC      =rc4-x86_64.o
  rc4-md5-x86_64.o
  > RC5_ENC     
  =rc5_enc.o
  > MD5_OBJ_ASM 
  =md5-x86_64.o
  > SHA1_OBJ_ASM 
  =sha1-x86_64.o sha256-x86_64.o
 sha512-x86_64.o
  sha1-mb-x86_64.o sha256-mb-x86_64.o
  >
  RMD160_OBJ_ASM=
  > CMLL_ENC     
  =cmll-x86_64.o cmll_misc.o
  > MODES_OBJ 
    =ghash-x86_64.o aesni-gcm-x86_64.o
  >
  PADLOCK_OBJ  =e_padlock-x86_64.o
  >
  CHACHA_ENC    =chacha-x86_64.o
  >
  POLY1305_OBJ  =poly1305-x86_64.o
  >
  BLAKE2_OBJ    =
  > PROCESSOR    =
  > RANLIB        =ranlib
  > ARFLAGS      =
  >
  PERL          =/usr/bin/perl
  >
  > SIXTY_FOUR_BIT_LONG mode
  >
  > Configured for
  linux-x86_64.
  > [root@localhost
  openssl-1.1.0f]#
  >
  >
  make didnt give any error.
  >
  > make install didnt give any
 error
  >
  > updatedb
  >
  > STEP 2:
  > [root@localhost
  openssl-1.1.0f]# md5sum
 
 /home/jlulla/openssl-1.1.0f/libssl.so.1.1
  /usr/local/lib64/libssl.so.1.1
  >
  5a7264a3ebda22989c831794d30677c5 
 
 /home/jlulla/openssl-1.1.0f/libssl.so.1.1
  >
 5a7264a3ebda22989c831794d30677c5 
  /usr/local/lib64/libssl.so.1.1
  >
  > [root@localhost
  openssl-1.1.0f]# ls -l
  /home/jlulla/openssl-1.1.0f/libssl.so
  >
  lrwxrwxrwx. 1 root root 13 Aug 10
 23:45
  /home/jlulla/openssl-1.1.0f/libssl.so
 -> libssl.so.1.1
  >
  >
  > [root@localhost
  apps]# pwd
  >
  /home/jlulla/openssl-1.1.0f/apps
  > [root@localhost
  apps]# ./openssl
  > ./openssl: error while
  loading shared libraries:
 libssl.so.1.1: cannot open shared
  object file: No such file or
 directory
  >
 
  > [root@localhost
  apps]# ldd ./openssl
  >       
  linux-vdso.so.1 => 
 (0x00007ffd02f3c000)
  >         libssl.so.1.1
 => not
  found
  >        
 libcrypto.so.1.1
  => not found
  >         libdl.so.2
  => /lib64/libdl.so.2
 (0x00007f0439fda000)
  >         libpthread.so.0
 =>
  /lib64/libpthread.so.0
 (0x00007f0439dbe000)
  >         libc.so.6 =>
  /lib64/libc.so.6 (0x00007f04399fc000)
  > 
        
 /lib64/ld-linux-x86-64.so.2
  (0x000055d618530000)
  >
  >
  > [root@localhost
  apps]# ls -l /lib64/libssl.so.1.1
  > ls:
  cannot access /lib64/libssl.so.1.1: No
 such file or
  directory
  >
  > ln -s
  /usr/local/lib64/libssl.so.1.1
 /lib64/libssl.so.1.1
  >
  > STEP 3:
  > [root@localhost
  apps]# ln -s
 /usr/local/lib64/libssl.so.1.1
  /lib64/libssl.so.1.1
  > [root@localhost
  apps]# ls -l /lib64/libssl.so.1.1
  >
  lrwxrwxrwx. 1 root root 30 Aug 10
 23:57 /lib64/libssl.so.1.1
  -> /usr/local/lib64/libssl.so.1.1
  >
 
  >
  > [root@localhost
  apps]# ln -s
 /usr/local/lib64/libcrypto.so.1.1
  /lib64/libcrypto.so.1.1
  > [root@localhost
  apps]# ls -l /lib64/libcrypto.so.1.1
  >
  lrwxrwxrwx. 1 root root 33 Aug 10
 23:58
  /lib64/libcrypto.so.1.1 ->
  /usr/local/lib64/libcrypto.so.1.1
  >
  > [root@localhost
  apps]# ldd ./openssl
  >       
  linux-vdso.so.1 => 
 (0x00007ffd37b5e000)
  >         libssl.so.1.1
 =>
  /lib64/libssl.so.1.1
 (0x00007f82881f8000)
  >         libcrypto.so.1.1
 =>
  /lib64/libcrypto.so.1.1
 (0x00007f8287d73000)
  >         libdl.so.2
 =>
  /lib64/libdl.so.2
 (0x00007f8287b6e000)
  >         libpthread.so.0
 =>
  /lib64/libpthread.so.0
 (0x00007f8287952000)
  >         libc.so.6 =>
  /lib64/libc.so.6 (0x00007f8287591000)
  > 
        
 /lib64/ld-linux-x86-64.so.2
  (0x000055f06bc67000)
  >
  >
  > [root@localhost
  apps]# ./openssl version
  > OpenSSL
  1.1.0f  25 May 2017
  >
  >
  > STEP 4:
  > [root@localhost
  afalg]# pwd
  >
 
 /home/jlulla/openssl-1.1.0f/engines/afalg
  >
  > [root@localhost
  afalg]# ls
  > afalg.so  build.info 
  e_afalg.c  e_afalg.d  e_afalg.ec 
 e_afalg_err.c 
  e_afalg_err.d  e_afalg_err.h 
 e_afalg_err.o  e_afalg.h 
  e_afalg.o
  >
  > [root@localhost
  afalg]# ldd afalg.so
  >       
  linux-vdso.so.1 => 
 (0x00007fff1d7ef000)
  >         libcrypto.so.1.1
 =>
  /lib64/libcrypto.so.1.1
 (0x00007f3a80166000)
  >         libdl.so.2
 =>
  /lib64/libdl.so.2
 (0x00007f3a7ff62000)
  >         libpthread.so.0
 =>
  /lib64/libpthread.so.0
 (0x00007f3a7fd45000)
  >         libc.so.6 =>
  /lib64/libc.so.6 (0x00007f3a7f984000)
  > 
        
 /lib64/ld-linux-x86-64.so.2
  (0x0000560991976000)
  >
  >
  > [root@localhost
  afalg]# nm afalg.so
  > 0000000000202060 d
  AFALG_error_init
  > 0000000000202220 b
  AFALG_lib_error_code
  > 0000000000202160 d
  AFALG_str_functs
  > 0000000000202080 d
  AFALG_str_reasons
  > 0000000000202210 B
  __bss_start
  > 0000000000202210 b
  completed.6344
  >               
  w __cxa_finalize@@GLIBC_2.2.5
  >
  0000000000000a00 t
 deregister_tm_clones
  >
  0000000000000a70 t
 __do_global_dtors_aux
  > 0000000000201da0 t
 
 __do_global_dtors_aux_fini_array_entry
  >
  0000000000201db0 d __dso_handle
  >
  0000000000201db8 d _DYNAMIC
  >
  0000000000202210 D _edata
  >
  0000000000202228 B _end
  >
  0000000000000af0 T
 engine_load_afalg_int
  > 0000000000000bb0 T
 ERR_AFALG_error
  >                 U
 
 ERR_get_next_error_library@@OPENSSL_1_1_0
  > 0000000000000b00 T
  ERR_load_AFALG_strings
  >           
       U
 ERR_load_strings@@OPENSSL_1_1_0
  >                 U
  ERR_put_error@@OPENSSL_1_1_0
  >
  0000000000000b60 T
 ERR_unload_AFALG_strings
  >                 U
  ERR_unload_strings@@OPENSSL_1_1_0
  >
  0000000000000bf8 T _fini
  >
  0000000000000ab0 t frame_dummy
  >
  0000000000201d98 t
 __frame_dummy_init_array_entry
  > 0000000000000eb8 r __FRAME_END__
  > 0000000000202000 d
  _GLOBAL_OFFSET_TABLE_
  >           
       w __gmon_start__
  >
  0000000000000970 T _init
  >         
         w
 _ITM_deregisterTMCloneTable
  >                 w
  _ITM_registerTMCloneTable
  >
  0000000000201da8 d __JCR_END__
  >
  0000000000201da8 d __JCR_LIST__
  >     
             w
 _Jv_RegisterClasses
  >
  0000000000000a30 t register_tm_clones
  >
  0000000000202210 d __TMC_END__
  >
  >
  > [root@localhost
  openssl-1.1.0f]# locate afalg.so
  >
 
 /home/jlulla/openssl-1.1.0f/engines/afalg/afalg.so
  >
 /usr/local/lib64/engines-1.1/afalg.so
  >
  >
  > [root@localhost
  openssl-1.1.0f]# md5sum
 
 /home/jlulla/openssl-1.1.0f/engines/afalg/afalg.so
  /usr/local/lib64/engines-1.1/afalg.so
  >
  ec273faa6eb6e25f55e44a7d37adf195 
 
 /home/jlulla/openssl-1.1.0f/engines/afalg/afalg.so
  >
 ec273faa6eb6e25f55e44a7d37adf195 
  /usr/local/lib64/engines-1.1/afalg.so
  >
 
  >
  > [root@localhost
  apps]# date
  > Fri Aug 11 00:01:10 PDT
  2017
  >
  >
  > [root@localhost
  apps]# ls -l
 /usr/local/ssl/openssl.cnf
  >
  -rw-r--r--. 1 root root 10771 Aug 10
 23:47
  /usr/local/ssl/openssl.cnf
  >
  > [root@localhost
  apps]# md5sum
 /usr/local/ssl/openssl.cnf
 
 /home/jlulla/openssl-1.1.0f/apps/openssl.cnf
  >
 f697ef5df0d006882e6326606e8dbf4a 
  /usr/local/ssl/openssl.cnf
  >
  f697ef5df0d006882e6326606e8dbf4a 
 
 /home/jlulla/openssl-1.1.0f/apps/openssl.cnf
  >
  >
  > openssl.cnf has the following:
  > ..
  > ..
  > # Extra OBJECT IDENTIFIER info:
  > #oid_file              =
  $ENV::HOME/.oid
  > oid_section       
      = new_oids
  >
  >
  # To use this configuration file with
 the
  "-extfile" option of the
  > #
  "openssl x509" utility, name here the
 section
  containing the
  > # X.509v3 extensions to
  use:
  > # extensions            =
  > # (Alternatively, use a
 configuration file
  that has only
  > # X.509v3 extensions in
  its main [= default] section.)
  >
  > ..
  > ..
  >
  > [root@localhost
  apps]# ./openssl speed -evp
 aes-128-cbc -engine afalg
  > invalid engine "afalg"
  >
 139853452924736:error:2506406A:DSO support
  routines:dlfcn_bind_func:could not
 bind to the requested
  symbol
 name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine):
  /usr/local/lib64/engines-1.1/afalg.so:
 undefined symbol:
  bind_engine
  >
  139853452924736:error:2506C06A:DSO
 support
  routines:DSO_bind_func:could not bind
 to the requested
  symbol name:crypto/dso/dso_lib.c:185:
  >
  139853452924736:error:260B6068:engine
  routines:dynamic_load:DSO
  failure:crypto/engine/eng_dyn.c:427:
  >
  139853452924736:error:2606A074:engine
  routines:ENGINE_by_id:no such
 
 engine:crypto/engine/eng_list.c:339:id=afalg
  >
 139853452924736:error:25066067:DSO support
  routines:dlfcn_load:could not load the
 shared
 
 library:crypto/dso/dso_dlfcn.c:113:filename(libafalg.so):
  libafalg.so: cannot open shared object
 file: No such file or
  directory
  >
  139853452924736:error:25070067:DSO
 support
  routines:DSO_load:could not load the
 shared
  library:crypto/dso/dso_lib.c:161:
  >
  139853452924736:error:260B6084:engine
  routines:dynamic_load:dso not
  found:crypto/engine/eng_dyn.c:414:
  >
  ^C
  >
  >
  > Modified both the files as the
  follwing:
  > /usr/local/ssl/openssl.cnf
  >
 
 /home/jlulla/openssl-1.1.0f/apps/openssl.cnf
  >
  > # Extra OBJECT
  IDENTIFIER info:
  > #oid_file       
        = $ENV::HOME/.oid
  >
  oid_section            =
 new_oids
  >
 
  > openssl_conf = openssl_def
  >
  > [openssl_def]
  > engines = openssl_engines
  >
  > [openssl_engines]
  > afalg = afalg_engine
  >
 
  > [afalg_engine]
  >
  CIPHERS=aes-128-cbc
  >
  > With the above, the errors are
 more:
  > [root@localhost
  apps]# ./openssl speed -evp
 aes-128-cbc -engine afalg
  > invalid engine "afalg"
  >
 140473780422464:error:2506406A:DSO support
  routines:dlfcn_bind_func:could not
 bind to the requested
  symbol
 name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine):
  /usr/local/lib64/engines-1.1/afalg.so:
 undefined symbol:
  bind_engine
  >
  140473780422464:error:2506C06A:DSO
 support
  routines:DSO_bind_func:could not bind
 to the requested
  symbol name:crypto/dso/dso_lib.c:185:
  >
  140473780422464:error:260B6068:engine
  routines:dynamic_load:DSO
  failure:crypto/engine/eng_dyn.c:427:
  >
  140473780422464:error:2606A074:engine
  routines:ENGINE_by_id:no such
 
 engine:crypto/engine/eng_list.c:339:id=afalg
  >
 140473780422464:error:260BC066:engine
  routines:int_engine_configure:engine
 configuration
 
 error:crypto/engine/eng_cnf.c:141:section=afalg_engine,
  name=CIPHERS, value=aes-128-cbc
  >
 
 140473780422464:error:0E07606D:configuration file
  routines:module_run:module
 initialization
 
 error:crypto/conf/conf_mod.c:173:module=engines,
  value=openssl_engines, retcode=-1
  >
  140473780422464:error:2506406A:DSO
 support
  routines:dlfcn_bind_func:could not
 bind to the requested
  symbol
 name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine):
  /usr/local/lib64/engines-1.1/afalg.so:
 undefined symbol:
  bind_engine
  >
  140473780422464:error:2506C06A:DSO
 support
  routines:DSO_bind_func:could not bind
 to the requested
  symbol name:crypto/dso/dso_lib.c:185:
  >
  140473780422464:error:260B6068:engine
  routines:dynamic_load:DSO
  failure:crypto/engine/eng_dyn.c:427:
  >
  140473780422464:error:2606A074:engine
  routines:ENGINE_by_id:no such
 
 engine:crypto/engine/eng_list.c:339:id=afalg
  >
 140473780422464:error:25066067:DSO support
  routines:dlfcn_load:could not load the
 shared
 
 library:crypto/dso/dso_dlfcn.c:113:filename(libafalg.so):
  libafalg.so: cannot open shared object
 file: No such file or
  directory
  >
  140473780422464:error:25070067:DSO
 support
  routines:DSO_load:could not load the
 shared
  library:crypto/dso/dso_lib.c:161:
  >
  140473780422464:error:260B6084:engine
  routines:dynamic_load:dso not
  found:crypto/engine/eng_dyn.c:414:
  >
  ^C
  >
 
--
openssl-dev mailing list
To unsubscribe: https://mta.openssl.org/mailman/listinfo/openssl-dev
Reply | Threaded
Open this post in threaded view
|

Re: afalg with OpenSSL 1.1.0f 25 May 2017

Matt Caswell-2


On 16/08/17 09:00, Jitendra Lulla wrote:

> Hi Matt,
>
> Thanks, I could find that the /usr/include/linux/version.h has #define LINUX_VERSION_CODE 199168 for my booted kernel 4.9.37. Which is why I see the following warnings also:
>
> gcc  -Iinclude -DDSO_DLFCN -DHAVE_DLFCN_H -DNDEBUG -DOPENSSL_THREADS -DOPENSSL_NO_STATIC_ENGINE -DOPENSSL_PIC -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5 -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DRC4_ASM -DMD5_ASM -DAES_ASM -DVPAES_ASM -DBSAES_ASM -DGHASH_ASM -DECP_NISTZ256_ASM -DPADLOCK_ASM -DPOLY1305_ASM -DOPENSSLDIR="\"/usr/local/ssl\"" -DENGINESDIR="\"/usr/local/lib64/engines-1.1\"" -Wall -O3 -pthread -m64 -DL_ENDIAN  -Wa,--noexecstack -fPIC -DOPENSSL_USE_NODELETE -MMD -MF engines/afalg/e_afalg.d.tmp -MT engines/afalg/e_afalg.o -c -o engines/afalg/e_afalg.o engines/afalg/e_afalg.c
> engines/afalg/e_afalg.c:30:4: warning: #warning "AFALG ENGINE requires Kernel Headers >= 4.1.0" [-Wcpp]
>  #  warning "AFALG ENGINE requires Kernel Headers >= 4.1.0"
>     ^
> engines/afalg/e_afalg.c:31:4: warning: #warning "Skipping Compilation of AFALG engine" [-Wcpp]
>  #  warning "Skipping Compilation of AFALG engine"
>
>
> I will fix this problem now by having proper setup. Will update if I face any more issues.


Yes - your kernel headers must be at least at 4.1.0 or better for afalg
to work.

Matt


>
> Thanks
> Jitendra
>
>
>
>
> --------------------------------------------
> On Wed, 8/16/17, Jitendra Lulla <[hidden email]> wrote:
>
>  Subject: Re: afalg with OpenSSL 1.1.0f 25 May 2017
>  To: "[hidden email]" <[hidden email]>, "Matt Caswell" <[hidden email]>
>  Cc: "Jitendra Lulla" <[hidden email]>
>  Date: Wednesday, August 16, 2017, 6:30 AM
>  
>  Hi Matt,
>  
>  
>  I have linux 4.9.37 on RHEL7.3.
>  [root@localhost
>  jlulla]# uname -a
>  Linux localhost.localdomain 4.9.37 #1
>  SMP Fri Jul 21 04:52:46 PDT 2017 x86_64 x86_64 x86_64
>  GNU/Linux
>  
>  
>  [root@localhost
>  test]# OPENSSL_ENGINES=../engines/afalg
>  ../util/shlib_wrap.sh ./afalgtest
>  AFALG not supported - skipping AFALG
>  tests
>  PASS
>  [root@localhost
>  test]#
>  
>  
>  I am getting here:
>  # if LINUX_VERSION_CODE <=
>  KERNEL_VERSION(K_MAJ, K_MIN1, K_MIN2)
>  /*
>   * If we get here then it looks like
>  there is a mismatch between the linux
>   * headers and the actual kernel
>  version, so we have tried to compile with
>   * afalg support, but then skipped it
>  in e_afalg.c. As far as this test is
>   * concerned we behave as if we had
>  been configured without support
>   */
>  #  define OPENSSL_NO_AFALGENG
>  # endif
>  
>  
>  Following is the value for
>  KERNEL_VERSION for me:
>  
>  [root@localhost
>  jlulla]# ./kernelversion (program at the bottom of this
>  mail)
>  KERNEL_VERSION: 262400
>  LINUX_VERSION_CODE 199168
>  condition:1
>  
>  
>  Where should I look to fix it?
>  
>  Thanks
>  Jitrendra
>  
>  
>  [root@localhost
>  jlulla]# cat kernelversion.c
>  #define LINUX_VERSION_CODE 199168
>  #define KERNEL_VERSION(a,b,c) (((a)
>  << 16) + ((b) << 8) + (c))
>  #define RHEL_MAJOR 7
>  #define RHEL_MINOR 3
>  #define RHEL_RELEASE_VERSION(a,b) (((a)
>  << 8) + (b))
>  #define RHEL_RELEASE_CODE 1795
>  #define RHEL_RELEASE "514"
>  
>  # define K_MAJ   4
>  # define K_MIN1  1
>  # define K_MIN2  0
>  #include<stdio.h>
>  
>  int main()
>  {
>        
>  printf("KERNEL_VERSION: %d\n",  KERNEL_VERSION(K_MAJ,
>  K_MIN1, K_MIN2));
>        
>  printf("LINUX_VERSION_CODE %d\n", LINUX_VERSION_CODE);
>        
>  printf("condition:%d\n",
>          
>              
>  (LINUX_VERSION_CODE <= KERNEL_VERSION(K_MAJ, K_MIN1,
>  K_MIN2)));
>  }
>  
>  
>  
>  --------------------------------------------
>  On Mon, 8/14/17, Matt Caswell <[hidden email]>
>  wrote:
>  
>   Subject: Re: afalg with OpenSSL 1.1.0f
>  25 May 2017
>   To: "[hidden email]"
>  <[hidden email]>
>   Cc: "Jitendra Lulla" <[hidden email]>
>   Date: Monday, August 14, 2017, 3:44
>  PM
>  
>   Comments inserted.
>  
>   On 14/08/17 08:20, Jitendra
>   Lulla wrote:
>   > Hi,
>   >
>  
>   > I am trying to use afalg on
>  Linux
>   4.9.37 with OpenSSL 1.1.0f.
>   >
>   > I am facing 2 issues:
>   >
>  
>   > ONE: when I issue the speed
>  command, I
>   see the following:
>   >
>   > [root@localhost
>   apps]# ./openssl speed -evp
>  aes-128-cbc -engine afalg
>   > invalid engine "afalg"
>   >
>  139853452924736:error:2506406A:DSO support
>   routines:dlfcn_bind_func:could not
>  bind to the requested
>   symbol
>  name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine):
>   /usr/local/lib64/engines-1.1/afalg.so:
>  undefined symbol:
>   bind_engine
>   >
>   139853452924736:error:2506C06A:DSO
>  support
>   routines:DSO_bind_func:could not bind
>  to the requested
>   symbol name:crypto/dso/dso_lib.c:185:
>   >
>   139853452924736:error:260B6068:engine
>   routines:dynamic_load:DSO
>   failure:crypto/engine/eng_dyn.c:427:
>   >
>   139853452924736:error:2606A074:engine
>   routines:ENGINE_by_id:no such
>  
>  engine:crypto/engine/eng_list.c:339:id=afalg
>   >
>  139853452924736:error:25066067:DS
>   >
>   >
>   > nm afalg.so doesn't show
>   bind_engine
>   >
>   Assuming
>   you have already successfully built
>  OpenSSL using
>   "make", from
>   the "test"
>   subdir of the directory where you
>  downloaded the source,
>   what
>   happens if you execute:
>  
>   OPENSSL_ENGINES=../engines/afalg
>   ../util/shlib_wrap.sh ./afalgtest
>  
>   Another thing to try is (from the top
>  level
>   source dir)
>  
>   touch
>   engines/afalg/e_afalg.c
>   make
>  
>   Check to see if there are any
>   warnings generated during the
>  compilation
>   of
>   the engine.
>  
>   >
>   > When I modify the openssl.cnf
>  file with
>   the engine name and the CIPHERS, still
>  I dont get it
>   working. The command output and the
>  change in the
>   openssl.cnf pasted at the end of the
>  mail.
>   >
>   >
>   > TWO: I had to create a softlink
>  to
>   libcrypto.so.1.1 and libssl.so.1.1
>  like the following to
>   make openssl command work:
>   > ln -s
>   /usr/local/lib64/libssl.so.1.1
>  /lib64/libssl.so.1.1
>   > ln -s
>  /usr/local/lib64/libcrypto.so.1.1
>   /lib64/libcrypto.so.1.1
>   >
>   > Is creating the softlinks a known
>  issue
>   and will be fixed?
>   No, this will not be
>   fixed and may not be the most
>  appropriate thing to
>   do on all systems.
>  
>  
>   Matt
>  
>  
>   >
>   > I have pasted the
>   complete information about the
>  OS/distro environment and
>   installation commands I ran at the
>  bottom.
>   > Could you please suggest what
>  wrong I am
>   doing to make afalg work.
>   >
>   > Thanks
>   > Jitendra
>   Lulla
>   >
>   > ========
>   >
>   >
>   > BEFORE INSTALLATION:
>   >
>  
>   > [root@localhost
>   jlulla]# rpm -qa  |grep openssl
>   >
>   openssl-1.0.1e-60.el7.x86_64
>   >
>   openssl-devel-1.0.1e-60.el7.x86_64
>   >
>   openssl-libs-1.0.1e-60.el7.x86_64
>   >
>   > [root@localhost
>   jlulla]# openssl version
>   > OpenSSL
>   1.0.1e-fips 11 Feb 2013
>   >
>   >
>   >
>   > PLEASE SEE FROM HERE PLEASE SEE
>  FROM HERE
>   PLEASE SEE FROM
>  HERE----------------------------
>   >
>   > STEP 1 : SOURCE
>   TAKEN FROM https://www.openssl.org/source/openssl-1.1.0f.tar.gz
>   2017-May-25 13:09:51
>   >
>   > [root@localhost
>   jlulla]# uname -a
>   > Linux
>   localhost.localdomain 4.9.37 #1 SMP
>  Fri Jul 21 04:52:46 PDT
>   2017 x86_64 x86_64 x86_64 GNU/Linux
>   >
>   > [root@localhost
>   jlulla]# cat /etc/redhat-release
>   > Red
>   Hat Enterprise Linux Server release
>  7.3 (Maipo)
>   >
>   >
>   >
>   > [root@localhost
>   openssl-1.1.0f]# pwd
>   >
>   /home/jlulla/openssl-1.1.0f
>   >
>   > STEP 2: [root@localhost
>   openssl-1.1.0f]# ./config shared
>  enable-engine enable-dso
>   enable-afalgeng
>   > Operating system:
>   x86_64-whatever-linux2
>   > Configuring for
>   linux-x86_64
>   > Configuring OpenSSL
>   version 1.1.0f (0x1010006fL)
>   >    
>   no-asan        [default]
>  OPENSSL_NO_ASAN
>   >     no-crypto-mdebug
>  [default]
>   OPENSSL_NO_CRYPTO_MDEBUG
>   >    
>   no-crypto-mdebug-backtrace
>  [default]
>   OPENSSL_NO_CRYPTO_MDEBUG_BACKTRACE
>   >  
>    no-ec_nistp_64_gcc_128
>  [default]
>   OPENSSL_NO_EC_NISTP_64_GCC_128
>   >    
>   no-egd          [default]
>  OPENSSL_NO_EGD
>   >     no-fuzz-afl  
>  [default]
>   OPENSSL_NO_FUZZ_AFL
>   >    
>   no-fuzz-libfuzzer [default]
>  OPENSSL_NO_FUZZ_LIBFUZZER
>   >     no-heartbeats
>  [default]
>   OPENSSL_NO_HEARTBEATS
>   >     no-md2  
>         [default]  OPENSSL_NO_MD2
>  (skip dir)
>   >     no-msan      
>  [default]
>   OPENSSL_NO_MSAN
>   >     no-rc5      
>     [default]  OPENSSL_NO_RC5 (skip
>  dir)
>   >     no-sctp      
>  [default]
>   OPENSSL_NO_SCTP
>   >     no-ssl-trace  
>   [default]  OPENSSL_NO_SSL_TRACE
>   >    
>   no-ssl3        [default]
>  OPENSSL_NO_SSL3
>   >     no-ssl3-method
>  [default]
>   OPENSSL_NO_SSL3_METHOD
>   >     no-ubsan
>         [default]  OPENSSL_NO_UBSAN
>   >
>      no-unit-test    [default]
>  OPENSSL_NO_UNIT_TEST
>   >     no-weak-ssl-ciphers
>  [default]
>   OPENSSL_NO_WEAK_SSL_CIPHERS
>   >    
>   no-zlib        [default]
>   >    
>   no-zlib-dynamic [default]
>   > Configuring
>   for linux-x86_64
>   > CC          
>   =gcc
>   > CFLAG        =-Wall -O3
>   -pthread -m64 -DL_ENDIAN
>  -Wa,--noexecstack
>   > SHARED_CFLAG  =-fPIC
>   -DOPENSSL_USE_NODELETE
>   > DEFINES    
>   =DSO_DLFCN HAVE_DLFCN_H NDEBUG
>  OPENSSL_THREADS
>   OPENSSL_NO_STATIC_ENGINE OPENSSL_PIC
>  OPENSSL_IA32_SSE2
>   OPENSSL_BN_ASM_MONT
>  OPENSSL_BN_ASM_MONT5 OPENSSL_BN_ASM_GF2m
>   SHA1_ASM SHA256_ASM SHA512_ASM RC4_ASM
>  MD5_ASM AES_ASM
>   VPAES_ASM BSAES_ASM GHASH_ASM
>  ECP_NISTZ256_ASM PADLOCK_ASM
>   POLY1305_ASM
>   > LFLAG        =
>   > PLIB_LFLAG    =
>   >
>   EX_LIBS      =-ldl
>   > APPS_OBJ    
>   =
>   > CPUID_OBJ    =x86_64cpuid.o
>   > UPLINK_OBJ    =
>   >
>   BN_ASM        =asm/x86_64-gcc.o
>  x86_64-mont.o
>   x86_64-mont5.o x86_64-gf2m.o
>  rsaz_exp.o rsaz-x86_64.o
>   rsaz-avx2.o
>   > EC_ASM      
>   =ecp_nistz256.o ecp_nistz256-x86_64.o
>   >
>   DES_ENC      =des_enc.o fcrypt_b.o
>   >
>   AES_ENC      =aes-x86_64.o
>  vpaes-x86_64.o bsaes-x86_64.o
>   aesni-x86_64.o aesni-sha1-x86_64.o
>  aesni-sha256-x86_64.o
>   aesni-mb-x86_64.o
>   > BF_ENC      
>   =bf_enc.o
>   > CAST_ENC      =c_enc.o
>   > RC4_ENC      =rc4-x86_64.o
>   rc4-md5-x86_64.o
>   > RC5_ENC    
>   =rc5_enc.o
>   > MD5_OBJ_ASM
>   =md5-x86_64.o
>   > SHA1_OBJ_ASM
>   =sha1-x86_64.o sha256-x86_64.o
>  sha512-x86_64.o
>   sha1-mb-x86_64.o sha256-mb-x86_64.o
>   >
>   RMD160_OBJ_ASM=
>   > CMLL_ENC    
>   =cmll-x86_64.o cmll_misc.o
>   > MODES_OBJ
>     =ghash-x86_64.o aesni-gcm-x86_64.o
>   >
>   PADLOCK_OBJ  =e_padlock-x86_64.o
>   >
>   CHACHA_ENC    =chacha-x86_64.o
>   >
>   POLY1305_OBJ  =poly1305-x86_64.o
>   >
>   BLAKE2_OBJ    =
>   > PROCESSOR    =
>   > RANLIB        =ranlib
>   > ARFLAGS      =
>   >
>   PERL          =/usr/bin/perl
>   >
>   > SIXTY_FOUR_BIT_LONG mode
>   >
>   > Configured for
>   linux-x86_64.
>   > [root@localhost
>   openssl-1.1.0f]#
>   >
>   >
>   make didnt give any error.
>   >
>   > make install didnt give any
>  error
>   >
>   > updatedb
>   >
>   > STEP 2:
>   > [root@localhost
>   openssl-1.1.0f]# md5sum
>  
>  /home/jlulla/openssl-1.1.0f/libssl.so.1.1
>   /usr/local/lib64/libssl.so.1.1
>   >
>   5a7264a3ebda22989c831794d30677c5
>  
>  /home/jlulla/openssl-1.1.0f/libssl.so.1.1
>   >
>  5a7264a3ebda22989c831794d30677c5
>   /usr/local/lib64/libssl.so.1.1
>   >
>   > [root@localhost
>   openssl-1.1.0f]# ls -l
>   /home/jlulla/openssl-1.1.0f/libssl.so
>   >
>   lrwxrwxrwx. 1 root root 13 Aug 10
>  23:45
>   /home/jlulla/openssl-1.1.0f/libssl.so
>  -> libssl.so.1.1
>   >
>   >
>   > [root@localhost
>   apps]# pwd
>   >
>   /home/jlulla/openssl-1.1.0f/apps
>   > [root@localhost
>   apps]# ./openssl
>   > ./openssl: error while
>   loading shared libraries:
>  libssl.so.1.1: cannot open shared
>   object file: No such file or
>  directory
>   >
>  
>   > [root@localhost
>   apps]# ldd ./openssl
>   >        
>   linux-vdso.so.1 =>
>  (0x00007ffd02f3c000)
>   >         libssl.so.1.1
>  => not
>   found
>   >        
>  libcrypto.so.1.1
>   => not found
>   >         libdl.so.2
>   => /lib64/libdl.so.2
>  (0x00007f0439fda000)
>   >         libpthread.so.0
>  =>
>   /lib64/libpthread.so.0
>  (0x00007f0439dbe000)
>   >         libc.so.6 =>
>   /lib64/libc.so.6 (0x00007f04399fc000)
>   >
>        
>  /lib64/ld-linux-x86-64.so.2
>   (0x000055d618530000)
>   >
>   >
>   > [root@localhost
>   apps]# ls -l /lib64/libssl.so.1.1
>   > ls:
>   cannot access /lib64/libssl.so.1.1: No
>  such file or
>   directory
>   >
>   > ln -s
>   /usr/local/lib64/libssl.so.1.1
>  /lib64/libssl.so.1.1
>   >
>   > STEP 3:
>   > [root@localhost
>   apps]# ln -s
>  /usr/local/lib64/libssl.so.1.1
>   /lib64/libssl.so.1.1
>   > [root@localhost
>   apps]# ls -l /lib64/libssl.so.1.1
>   >
>   lrwxrwxrwx. 1 root root 30 Aug 10
>  23:57 /lib64/libssl.so.1.1
>   -> /usr/local/lib64/libssl.so.1.1
>   >
>  
>   >
>   > [root@localhost
>   apps]# ln -s
>  /usr/local/lib64/libcrypto.so.1.1
>   /lib64/libcrypto.so.1.1
>   > [root@localhost
>   apps]# ls -l /lib64/libcrypto.so.1.1
>   >
>   lrwxrwxrwx. 1 root root 33 Aug 10
>  23:58
>   /lib64/libcrypto.so.1.1 ->
>   /usr/local/lib64/libcrypto.so.1.1
>   >
>   > [root@localhost
>   apps]# ldd ./openssl
>   >        
>   linux-vdso.so.1 =>
>  (0x00007ffd37b5e000)
>   >         libssl.so.1.1
>  =>
>   /lib64/libssl.so.1.1
>  (0x00007f82881f8000)
>   >         libcrypto.so.1.1
>  =>
>   /lib64/libcrypto.so.1.1
>  (0x00007f8287d73000)
>   >         libdl.so.2
>  =>
>   /lib64/libdl.so.2
>  (0x00007f8287b6e000)
>   >         libpthread.so.0
>  =>
>   /lib64/libpthread.so.0
>  (0x00007f8287952000)
>   >         libc.so.6 =>
>   /lib64/libc.so.6 (0x00007f8287591000)
>   >
>        
>  /lib64/ld-linux-x86-64.so.2
>   (0x000055f06bc67000)
>   >
>   >
>   > [root@localhost
>   apps]# ./openssl version
>   > OpenSSL
>   1.1.0f  25 May 2017
>   >
>   >
>   > STEP 4:
>   > [root@localhost
>   afalg]# pwd
>   >
>  
>  /home/jlulla/openssl-1.1.0f/engines/afalg
>   >
>   > [root@localhost
>   afalg]# ls
>   > afalg.so  build.info
>   e_afalg.c  e_afalg.d  e_afalg.ec
>  e_afalg_err.c
>   e_afalg_err.d  e_afalg_err.h
>  e_afalg_err.o  e_afalg.h
>   e_afalg.o
>   >
>   > [root@localhost
>   afalg]# ldd afalg.so
>   >        
>   linux-vdso.so.1 =>
>  (0x00007fff1d7ef000)
>   >         libcrypto.so.1.1
>  =>
>   /lib64/libcrypto.so.1.1
>  (0x00007f3a80166000)
>   >         libdl.so.2
>  =>
>   /lib64/libdl.so.2
>  (0x00007f3a7ff62000)
>   >         libpthread.so.0
>  =>
>   /lib64/libpthread.so.0
>  (0x00007f3a7fd45000)
>   >         libc.so.6 =>
>   /lib64/libc.so.6 (0x00007f3a7f984000)
>   >
>        
>  /lib64/ld-linux-x86-64.so.2
>   (0x0000560991976000)
>   >
>   >
>   > [root@localhost
>   afalg]# nm afalg.so
>   > 0000000000202060 d
>   AFALG_error_init
>   > 0000000000202220 b
>   AFALG_lib_error_code
>   > 0000000000202160 d
>   AFALG_str_functs
>   > 0000000000202080 d
>   AFALG_str_reasons
>   > 0000000000202210 B
>   __bss_start
>   > 0000000000202210 b
>   completed.6344
>   >                
>   w __cxa_finalize@@GLIBC_2.2.5
>   >
>   0000000000000a00 t
>  deregister_tm_clones
>   >
>   0000000000000a70 t
>  __do_global_dtors_aux
>   > 0000000000201da0 t
>  
>  __do_global_dtors_aux_fini_array_entry
>   >
>   0000000000201db0 d __dso_handle
>   >
>   0000000000201db8 d _DYNAMIC
>   >
>   0000000000202210 D _edata
>   >
>   0000000000202228 B _end
>   >
>   0000000000000af0 T
>  engine_load_afalg_int
>   > 0000000000000bb0 T
>  ERR_AFALG_error
>   >                 U
>  
>  ERR_get_next_error_library@@OPENSSL_1_1_0
>   > 0000000000000b00 T
>   ERR_load_AFALG_strings
>   >          
>        U
>  ERR_load_strings@@OPENSSL_1_1_0
>   >                 U
>   ERR_put_error@@OPENSSL_1_1_0
>   >
>   0000000000000b60 T
>  ERR_unload_AFALG_strings
>   >                 U
>   ERR_unload_strings@@OPENSSL_1_1_0
>   >
>   0000000000000bf8 T _fini
>   >
>   0000000000000ab0 t frame_dummy
>   >
>   0000000000201d98 t
>  __frame_dummy_init_array_entry
>   > 0000000000000eb8 r __FRAME_END__
>   > 0000000000202000 d
>   _GLOBAL_OFFSET_TABLE_
>   >          
>        w __gmon_start__
>   >
>   0000000000000970 T _init
>   >        
>          w
>  _ITM_deregisterTMCloneTable
>   >                 w
>   _ITM_registerTMCloneTable
>   >
>   0000000000201da8 d __JCR_END__
>   >
>   0000000000201da8 d __JCR_LIST__
>   >    
>              w
>  _Jv_RegisterClasses
>   >
>   0000000000000a30 t register_tm_clones
>   >
>   0000000000202210 d __TMC_END__
>   >
>   >
>   > [root@localhost
>   openssl-1.1.0f]# locate afalg.so
>   >
>  
>  /home/jlulla/openssl-1.1.0f/engines/afalg/afalg.so
>   >
>  /usr/local/lib64/engines-1.1/afalg.so
>   >
>   >
>   > [root@localhost
>   openssl-1.1.0f]# md5sum
>  
>  /home/jlulla/openssl-1.1.0f/engines/afalg/afalg.so
>   /usr/local/lib64/engines-1.1/afalg.so
>   >
>   ec273faa6eb6e25f55e44a7d37adf195
>  
>  /home/jlulla/openssl-1.1.0f/engines/afalg/afalg.so
>   >
>  ec273faa6eb6e25f55e44a7d37adf195
>   /usr/local/lib64/engines-1.1/afalg.so
>   >
>  
>   >
>   > [root@localhost
>   apps]# date
>   > Fri Aug 11 00:01:10 PDT
>   2017
>   >
>   >
>   > [root@localhost
>   apps]# ls -l
>  /usr/local/ssl/openssl.cnf
>   >
>   -rw-r--r--. 1 root root 10771 Aug 10
>  23:47
>   /usr/local/ssl/openssl.cnf
>   >
>   > [root@localhost
>   apps]# md5sum
>  /usr/local/ssl/openssl.cnf
>  
>  /home/jlulla/openssl-1.1.0f/apps/openssl.cnf
>   >
>  f697ef5df0d006882e6326606e8dbf4a
>   /usr/local/ssl/openssl.cnf
>   >
>   f697ef5df0d006882e6326606e8dbf4a
>  
>  /home/jlulla/openssl-1.1.0f/apps/openssl.cnf
>   >
>   >
>   > openssl.cnf has the following:
>   > ..
>   > ..
>   > # Extra OBJECT IDENTIFIER info:
>   > #oid_file              =
>   $ENV::HOME/.oid
>   > oid_section      
>       = new_oids
>   >
>   >
>   # To use this configuration file with
>  the
>   "-extfile" option of the
>   > #
>   "openssl x509" utility, name here the
>  section
>   containing the
>   > # X.509v3 extensions to
>   use:
>   > # extensions            =
>   > # (Alternatively, use a
>  configuration file
>   that has only
>   > # X.509v3 extensions in
>   its main [= default] section.)
>   >
>   > ..
>   > ..
>   >
>   > [root@localhost
>   apps]# ./openssl speed -evp
>  aes-128-cbc -engine afalg
>   > invalid engine "afalg"
>   >
>  139853452924736:error:2506406A:DSO support
>   routines:dlfcn_bind_func:could not
>  bind to the requested
>   symbol
>  name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine):
>   /usr/local/lib64/engines-1.1/afalg.so:
>  undefined symbol:
>   bind_engine
>   >
>   139853452924736:error:2506C06A:DSO
>  support
>   routines:DSO_bind_func:could not bind
>  to the requested
>   symbol name:crypto/dso/dso_lib.c:185:
>   >
>   139853452924736:error:260B6068:engine
>   routines:dynamic_load:DSO
>   failure:crypto/engine/eng_dyn.c:427:
>   >
>   139853452924736:error:2606A074:engine
>   routines:ENGINE_by_id:no such
>  
>  engine:crypto/engine/eng_list.c:339:id=afalg
>   >
>  139853452924736:error:25066067:DSO support
>   routines:dlfcn_load:could not load the
>  shared
>  
>  library:crypto/dso/dso_dlfcn.c:113:filename(libafalg.so):
>   libafalg.so: cannot open shared object
>  file: No such file or
>   directory
>   >
>   139853452924736:error:25070067:DSO
>  support
>   routines:DSO_load:could not load the
>  shared
>   library:crypto/dso/dso_lib.c:161:
>   >
>   139853452924736:error:260B6084:engine
>   routines:dynamic_load:dso not
>   found:crypto/engine/eng_dyn.c:414:
>   >
>   ^C
>   >
>   >
>   > Modified both the files as the
>   follwing:
>   > /usr/local/ssl/openssl.cnf
>   >
>  
>  /home/jlulla/openssl-1.1.0f/apps/openssl.cnf
>   >
>   > # Extra OBJECT
>   IDENTIFIER info:
>   > #oid_file      
>         = $ENV::HOME/.oid
>   >
>   oid_section            =
>  new_oids
>   >
>  
>   > openssl_conf = openssl_def
>   >
>   > [openssl_def]
>   > engines = openssl_engines
>   >
>   > [openssl_engines]
>   > afalg = afalg_engine
>   >
>  
>   > [afalg_engine]
>   >
>   CIPHERS=aes-128-cbc
>   >
>   > With the above, the errors are
>  more:
>   > [root@localhost
>   apps]# ./openssl speed -evp
>  aes-128-cbc -engine afalg
>   > invalid engine "afalg"
>   >
>  140473780422464:error:2506406A:DSO support
>   routines:dlfcn_bind_func:could not
>  bind to the requested
>   symbol
>  name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine):
>   /usr/local/lib64/engines-1.1/afalg.so:
>  undefined symbol:
>   bind_engine
>   >
>   140473780422464:error:2506C06A:DSO
>  support
>   routines:DSO_bind_func:could not bind
>  to the requested
>   symbol name:crypto/dso/dso_lib.c:185:
>   >
>   140473780422464:error:260B6068:engine
>   routines:dynamic_load:DSO
>   failure:crypto/engine/eng_dyn.c:427:
>   >
>   140473780422464:error:2606A074:engine
>   routines:ENGINE_by_id:no such
>  
>  engine:crypto/engine/eng_list.c:339:id=afalg
>   >
>  140473780422464:error:260BC066:engine
>   routines:int_engine_configure:engine
>  configuration
>  
>  error:crypto/engine/eng_cnf.c:141:section=afalg_engine,
>   name=CIPHERS, value=aes-128-cbc
>   >
>  
>  140473780422464:error:0E07606D:configuration file
>   routines:module_run:module
>  initialization
>  
>  error:crypto/conf/conf_mod.c:173:module=engines,
>   value=openssl_engines, retcode=-1
>   >
>   140473780422464:error:2506406A:DSO
>  support
>   routines:dlfcn_bind_func:could not
>  bind to the requested
>   symbol
>  name:crypto/dso/dso_dlfcn.c:178:symname(bind_engine):
>   /usr/local/lib64/engines-1.1/afalg.so:
>  undefined symbol:
>   bind_engine
>   >
>   140473780422464:error:2506C06A:DSO
>  support
>   routines:DSO_bind_func:could not bind
>  to the requested
>   symbol name:crypto/dso/dso_lib.c:185:
>   >
>   140473780422464:error:260B6068:engine
>   routines:dynamic_load:DSO
>   failure:crypto/engine/eng_dyn.c:427:
>   >
>   140473780422464:error:2606A074:engine
>   routines:ENGINE_by_id:no such
>  
>  engine:crypto/engine/eng_list.c:339:id=afalg
>   >
>  140473780422464:error:25066067:DSO support
>   routines:dlfcn_load:could not load the
>  shared
>  
>  library:crypto/dso/dso_dlfcn.c:113:filename(libafalg.so):
>   libafalg.so: cannot open shared object
>  file: No such file or
>   directory
>   >
>   140473780422464:error:25070067:DSO
>  support
>   routines:DSO_load:could not load the
>  shared
>   library:crypto/dso/dso_lib.c:161:
>   >
>   140473780422464:error:260B6084:engine
>   routines:dynamic_load:dso not
>   found:crypto/engine/eng_dyn.c:414:
>   >
>   ^C
>   >
>  
>
--
openssl-dev mailing list
To unsubscribe: https://mta.openssl.org/mailman/listinfo/openssl-dev